Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The PSB-2186NV1.1 is a kind of ISDN subscriber access controller for terminals. It implements the four-wire S/T interface used to link voice/data terminals to an ISDN. The device switches B- and D-channels between the S/T and the ISDN Oriented Modular (IOM) interfaces. Furthermore, the device provides all electrical and logical functions of the S/T interface, such as activation/deactivation, mode dependent timing recovery and D-channel access and priority control. It is available in P-LCC-44 (SMD) package.
There are some features as follows: (1) pin and software compatible to PEB 2086; (2) compatible to PEB 2085 (Symmetrical Receiver); (3) full duplex 2B+D S/T interface transceiver according to CCITT I.430; (4) conversion of the frame structure between the P-MQFP-64 S/T interface and IOM-2; (5) receive timing recovery; (6) D-channel access control; (7) activation and deactivation procedures with automatic wake-up from power-down state; (8) access to S and Q bits of S/T interface; (9) adaptively switched receive thresholds; (10) support of LAPD protocol FIFO buffer (2 x 64 bytes) for efficient transfer of D-channel packets; (11) serial interface: IOM-2 interface including bit clock and strobe signal; (12) implementation of IOM-2 MONITOR and C/I-channel protocol to control peripheral devices; (13) microprocessor access to B- and intercommunication-channels; watchdog timer.
What comes next is about the absolute maximum ratings. (1): voltage on any pin with respect to ground (VS) is from -0.4 to VDD + 0.4 V; (2): ambient temperature under bias (TA) is from 0 to 70; (3): storage temperature (Tstg) is from -65 to 125; (4): maximum voltage on VDD (VDD) is 6 V.