Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
Maximum ratings are those values beyond which damage to the device may occur. For functional operation, values should be restricted to the recommended operating conditions.
MC44BS373CA Features
The MC44BS373CA is a multi-standard, PAL/SECAM/NTSC modulator. The channel is set by an on-chip high-speed I2C-compatible bus receiver. A phase-locked loop (PLL) tunes the modulator over the full UHF range. The modulator incorporates a sound subcarrier oscillator and uses a second PLL to derive 4.5-, 5.5-, 6.0-,and 6.5-MHz subcarrier frequencies. These frequencies are selectable by bus. The modulation standard can be chosen using a control bit that selects between positive and negative modulation. The picture-to-sound ratio may be adjusted using the bus. In addition, an on-chip video test pattern generator can be switched on with a 1-kHz audio test signal. The MC44BS373CA also has the following features: • Integrated on-chip programmable UHF oscillator • No external varicaps diodes/inductor or tuned components • Extremely low external component count • Channel 2169 UHF operation • VHF range possible by internal dividers (30450 MHz) • Boosted TVOUT level (82 dBV typical) • High-speed read and write I2C bus compatible (800 kHz) • I2C address selectable by pin (four choices) using external resistor (available only in QFN20 package) • I2C bus 5- and 3.3-V compatible • Fixed video modulation depth (93% typical in system L and 82% typical in the other standards) • Peak white clip disabled by bus • Programmable picture/sound carrier ratio (12 and 16 dB) • Integrated on-chip programmable sound subcarrier oscillator (4.5, 5.5, 6.0 and 6.5 MHz)-no external varicaps • Programmable sound reference frequency (31.25 and 62.5 kHz) • Direct RF sound modulator input (FM and AM modulator bypassed) for NICAM or stereo sound applications (available only in QFN20 package) • On-chip video test pattern generator with sound test signal (1 kHz) • Low-power programmable modulator standby mode • Transient output inhibit during PLL lock-up at power-on • Logical output port controlled by bus • ESD protection, minimum 4 KV