Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The MAX793/MAX794/MAX795 microprocessor (P) supervisory circuits monitor and control the activities of +3.0V/+3.3V Ps by providing backup-battery switchover, among other features such as low-line indication, P reset, write protection for CMOS RAM, and a watchdog (see the Selector Guide below). The backup-battery voltage can exceed VCC, permitting the use of 3.6V lithium batteries in systems using 3.0V to 3.3V for VCC.
The MAX793/MAX795 offer a choice of reset threshold voltage range (denoted by suffix letter): 3.00V to 3.15V (T), 2.85V to 3.00V (S), and 2.55V to 2.70V (R). The MAX794's reset threshold is set externally with a resistor divider. The MAX793/MAX794 are available in 16-pin DIP and narrow SO packages, and the MAX795 comes in 8-pin DIP and SO packages. For similar devices designed for 5V systems, see the P Supervisory Circuits table at the back of this data sheet.
MAX794 Features
Precision Supply-Voltage Monitor: Fixed Reset Trip Voltage (MAX793/MAX795) Adjustable Reset Trip Voltage (MAX794) Guaranteed Reset Assertion to VCC = 1V Backup-Battery Power Switching-Battery Voltage Can Exceed VCC On-Board Gating of Chip-Enable Signals-7ns Max Propagation Delay MAX793/MAX794 Only Battery Freshness Seal Battery OK Output (MAX793) Uncommitted Voltage Monitor for Power-Fail or Low-Battery Warning Independent Watchdog Timer (1.6sec timeout) Manual Reset Input
MAX794 Typical Application
Battery-Powered Computers and Controllers Embedded Controllers Intelligent Controllers Critical P Power Monitoring Portable Equipment
MAX794 Connection Diagram
Terminal Voltage (with respect to GND) VCC ............................................................................................-0.3V to 6.0V VBATT .........................................................................................-0.3V to 6.0V All Other Inputs ......................................-0.3V to the higher of VCC or VBATT Continuous Input Current VCC .....................................................................................................200mA VBATT ....................................................................................................50mA GND........................................................................................................20mA Output Current VOUT....................................................................................................200mA All Other Outputs ..................................................................................20mA Continuous Power Dissipation (TA = +70°C) 8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) .......................727mW 8-Pin SO (derate 5.88mW/°C above +70°C)....................................471mW 16-Pin Plastic DIP (derate 10.53mW/°C above +70°C).................. .842mW 16-Pin Narrow SO (derate 9.52mW/°C above +70°C) .....................696mW Operating Temperature Ranges MAX793_C_ _/MAX794C_ _/MAX795_C_ _ ............................ 0°C to +70°C MAX793_E_ _/MAX794E_ _/MAX795_E_ _ ...........................-40°C to +85°C Storage Temperature Range .............................................-65°C to +160°C Lead Temperature (soldering, 10sec) ...............................................+300°C