Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The MAX3080MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-sacircuitry,which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logictransmitterson a terminated bus are disabled (high impedance).The MAX3080/MAX3081/MAX3082 feature reducedslew-rate drivers that minimize EMI and reduce reflec-tions caused by improperly terminated cables, allowingerror-free data transmission up to 115kbps. The MAX3083/MAX3084/MAX3085 offer higher driver out-slew-rate limits, allowing transmit speeds up to 500kbps. The MAX3086/MAX3087/MAX3088's driver slew rates are not limited, making transmit speeds up10Mbps possible. The MAX3089's slew rate is selectable between 115kbps, 500kbps, and 10Mbps by driving a selector pin with a single three-state driver.
These transceivers typically draw 375µA of supply current when unloaded, or when fully loaded with the drivers disabled.All devices have a 1/8-unit-load receiver input imped- ance that allows up to 256 transceivers on the bus. TheMAX3082/MAX3085/MAX3088 are intended for half-duplex communications, while the MAX3080/MAX3081/ MAX3083/MAX3084/MAX3086/MAX3087 are intended for full-duplex communications. The MAX3089 is selec- table between half-duplex and full-duplex operation. It also features independently programmable receiver and transmitter output phase viaseparate pins.
MAX3080 Maximum Ratings
Supply Voltage (VCC) .............................................................+7V Control Input Voltage (RE, DE)......................-0.3V to (VCC+ 0.3V) Special Input Voltage
(H/F, SRL, TXP, RXP)......................................-0.3V to (VCC+ 0.3V) Driver Input Voltage (DI)................................-0.3V to (VCC+ 0.3V) Driver Output Voltage (A, B, Y, Z)...........................................±13V Receiver Input Voltage (A, B).................................................±13V Receiver Input Voltage, Full Duplex (A, B)..............................±25V Receiver Output Voltage (RO)................,,,,....-0.3V to (VCC+ 0.3V)
Continuous Power Dissipation 8-Pin Plastic DIP (derate 9.09mW/°C above +70°C)..,,,,,,,.727mW 8-Pin SO (derate 5.88mW/°C above +70°C)......................471mW 14-Pin Plastic DIP (derate 10.0mW/°C above +70°C)........800mW 14-Pin SO (derate 8.33mW/°C above +70°C)....................667mW Operating Temperature Ranges MAX308_C_ _...........................................................0°C to +70°C MAX308_E_ _........................................................-40°C to +85°C Storage Temperature Range...............................-65°C to +150°C Lead Temperature (soldering, 10sec)................................+300°C
MAX3080 Features
True Fail-Safe Receiver While Maintaining EIA/TIA-485 Compatibility Enhanced Slew-Rate Limiting Facilitates Error-Free Data Transmission (MAX3080MAX3085/MAX3089) 1nA Low-Current Shutdown Mode (except MAX3081/MAX3084/MAX3087) Pin-Selectable Full/Half-Duplex Operation (MAX3089) Phase Controls to Correct for Twisted-Pair Reversal (MAX3089) Allow Up to 256 Transceivers on the Bus
MAX3080 Typical Application
RS-422/RS-485 Communications Level Translators Transceivers for EMI-Sensitive Applications Industrial-Control Local Area Networks