Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The L78L00 series of three-terminal positive regulators employ internal current limiting and thermal shutdown, making them essentially indestructible. If adequate heat-sink is provided, they can deliver up to 100 mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators.The L78L00 series used as Zener diode/resistor combination replacement, offers an effective output impedance improvement of typically two orders of magnitude, along with lower quiescent current and lower noise.
L78L33AC Maximum Ratings
Symbol
Parameter²
Value
Unit
VI
DC Input Voltage
VO = 3.3 to 9 V
30
V
VO =12to15V
35
VO =18to24V
40
IO
Output Current
100
mA
Ptot
Power Dissipation
Internally Limited(*)
Top
Operating Junction Temperature Range
for L78L00C, L78L00AC
-40 to 150
for L78L00AB
0 to 125
Tstg
Storage Temperature Range
-40 to 125
(*) Our SO-8 package used for Voltage Regulators is modified internally to have pins 2, 3, 6 and 7 electrically communed to the die attach flag. This particular frame decreases the total thermal resistance of the package and increases its ability to dissipate power when an appro-priate area of copper on the printed circuit board is available for heat-sinking. The external dimensions are the same as for the standard SO-8.
L78L33AC Features
· OUTPUT CURRENT UP TO 100 mA · OUTPUT VOLTAGES OF 3.3; 5; 6; 8; 9; 10;12; 15; 18; 20; 24V · THERMAL OVERLOAD PROTECTION · SHORT CIRCUIT PROTECTION · NO EXTERNAL COMPONENTS ARE REQUIRED · AVAILABLE IN EITHER ±5% (AC) OR ±10% (C) SELECTION