Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The HV9910B is an open loop, current mode, control LED driver IC. The HV9910B can be programmed to operate in either a constant frequency or constant off-time mode. It includes an 8.0 - 450V linear regulator which allows it to work from a wide range of input voltages without the need for an external low voltage supply. The HV9910B includes a PWM dimming input that can accept an external control signal with a duty ratio of 0 - 100% and a frequency of up to a few kilohertz.
It also includes a 0 - 250mV linear dimming input which can be used for linear dimming of the LED current.
The HV9910B is ideally suited for buck LED drivers. Since the HV9910B operates in open loop current mode control, the controller achieves good output current regulation without the need for any loop compensation. PWM dimming response is limited only by the rate of rise and fall of the inductor current, enabling very fast rise and fall times. The HV9910B requires only three external components (apart from the power stage) to produce a controlled LED current making it an ideal solution for low cost LED drivers.
HV9910B Maximum Ratings
Parameter
Value
VIN to GND
-0.5V to +470V
VDD to GND
12V
CS, LD, PWMD, GATE, RT to GND
-0.3V to (VDD +0.3V)
Junction temperature range
-40to +150
Storage temperature range
-65 to +150
Continuous power dissipation (TA = +25) 8-Lead SOIC 16-Lead SOIC
630mW 1300mW
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifi cations is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
HV9910B Features
Switch mode controller for single switch LED drivers Enhanced drop-in replacement to the HV9910 Open loop peak current controller Internal 8.0 to 450V linear regulator Constant frequency or constant off-time operation Linear and PWM dimming capability Requires few external components for operation
HV9910B Typical Application
DC/DC or AC/DC LED driver applications RGB backlighting LED driver Back lighting of fl at panel displays General purpose constant current source Signage and decorative LED lighting Chargers