Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The GMS81C7008/7016 is advanced CMOS 8-bit microcontrollers with 8K/16K bytes of ROM. There are a powerful microcontroller which provides a highly flexible and cost effective solution to many LCD applications. These provide the following standard features:16K/ 8K bytes of mask type ROM or 16K bytes OTP ROM, 448 bytes of RAM, 8-bit timer/counter, 8-bit A/D converter, 10 bit high speed PWM Output, programmable buzzer driving port, 8-bit basic interval timer, watch dog timer, serial peripheral interface, on chip oscillator and clock circuitry. They also come with 4com/24seg LCD driver. In addition, it support power saving mode to reduce power consumption.
GMS81C7008 Maximum Ratings
Supply voltage ............................................. -0.3 to +6.0 V Storage Temperature ...................................-40 to +125 Voltage on any pin with respect to Ground (VSS) .................................................................. -0.3 to VDD+0.3 Maximum current out of VSS pin ..............................100 mA Maximum current into VDD pin ...................................80 mA Maximum current sunk by (IOL per I/O Pin) .............. 20 mA Maximum output current sourced by (IOH per I/O Pin) ...................................................................................15 mA Maximum current (SIOL) .......................................100 mA Maximum current (IOH)........................................... 60 mA
GMS81C7008 Features
• 8K/16K Bytes On-chip Programmable ROM • 448 Bytes of On-chip Data RAM (Included stack area and 27 nibbles LCD Display RAM) • Instruction Execution Time 1ms at 4MHz (2cycle NOP Instruction) • One 8-bit Basic Interval Timer • One Watch Timer • One Watchdog Timer • Four 8-bit Timer/Event Counter (or Two 16-bit Timer/Event Counter) • Two channel 10-bit High Speed PWM Output • Three External Interrupt input ports • One Programmable 6-bit Buzzer Driving port - 500Hz ~ 250kHz@4MHz • 49 I/O Ports • Eight channel 8-bit A/D converter • One 8-bit Serial Communication Interface • LCD Display/ Controller - Static Mode (27SEG x 1COM, Static) - 1/2 Duty Mode (26SEG x 2COM, 1/2 or 1/3 Bias) - 1/3 Duty Mode (25SEG x 3COM, 1/3 Bias) - 1/4 Duty Mode (24SEG x 4COM, 1/3 Bias) - Internal Built-in Resistor Circuit for Bias • Thirteen Interrupt sources - Basic Interval Timer: 1 - External input: 3 - Timer/Event counter: 4 - ADC: 1 - Serial Interface: 1 - WT:1 - WDT: 1 - Key Scan: 1 • Main Clock Oscillation (1.0~4.5MHz) - Crystal - Ceramic Resonator - External R Oscillator (Built-in Capacitor) • Sub Clock Oscillation - 32.768kHz Crystal Oscillator • Power Saving Operation Mode - Main / Sub Active mode changeable - 2/8/16/64 divided system clock selectable • Power Down Mode - STOP mode - SLEEP mode - Sub active Mode • 2.7V to 5.5V Wide Operating Voltage Range • Noise Immunity Circuit for EMS