DS8881, DS8881N606, DS8884A Selling Leads, Datasheet
MFG:5 Package Cooled:DIP18 D/C:08+
DS8881, DS8881N606, DS8884A Datasheet download
Part Number: DS8881
MFG: 5
Package Cooled: DIP18
D/C: 08+
MFG:5 Package Cooled:DIP18 D/C:08+
DS8881, DS8881N606, DS8884A Datasheet download
MFG: 5
Package Cooled: DIP18
D/C: 08+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: DS8881
File Size: 112038 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: DS8
File Size: 292285 KB
Manufacturer: Linear
Download : Click here to Download
PDF/DataSheet Download
Datasheet: DS8884A
File Size: 100553 KB
Manufacturer: NSC [National Semiconductor]
Download : Click here to Download
The DS8881 vacuum fluorescent display driver will drive 16-digit grids of a vacuum fluorescent display. The decode inputs select one of the sixteen outputs to be pulled high. The device contains an oscillator for supplying clock signals to the MOS circuit, the filament bias zener and 50 kX pulldown resistors for each grid. Outputs will source up to 7 mA. The DS8881 is designed for 9V operation. If the enable input is pulled low, all outputs are disabled.
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales ffice/Distributors for availability and specifications.
Supply Voltage (VSS-VBB) .................38V
Input Current .....................10 mA
Output Current ....................-20 mA
Storage Temperature ..........-65°C to +150°C
Maximum Power Dissipation* at 25°C
Molded Package................... 2168 mW
Lead Temperature (Soldering, 4 sec.)......... 260°C
*Derate molded package 17.35 mW/°C above 25°C.
The DS8884A is designed to decode four lines of BCD input and drive seven-segment digits of gas-filled readout displays.
All outputs consist of switchable and programmable current sinks which provide constant current to the tube cathodes, even with high tube anode supply tolerance. Output currents may be varied over the 0.2 mA to 1.2 mA range for multiplex operation. The output current is adjusted by connecting an external program resistor (RP) from VCC to the program input in accordance with the programming curve. Unused outputs must be tied to VCC.