Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The ADG711, ADG712 and ADG713 are monolithic CMOS devices containing four independently selectable switches. These switches are designed on an advanced submicron process that provides low power dissipation yet gives high switching speed, low on resistance, low leakage currents and high bandwidth.
They are designed to operate from a single +1.8 V to +5.5 V supply, making them ideal for use in battery powered instruments and with the new generation of DACs and ADCs from Analog Devices. Fast switching times and high bandwidth make the part suitable for video signal switching.
The ADG711, ADG712 and ADG713 contain four independent single-pole/single throw (SPST) switches. The ADG711 and ADG712 differ only in that the digital control logic is inverted.
The ADG711 switches are turned on with a logic low on the appropriate control input, while a logic high is required to turn on the switches of the ADG712. The ADG713 contains two switches whose digital control logic is similar to the ADG711, while the logic is inverted on the other two switches.
Each switch conducts equally well in both directions when ON. The ADG713 exhibits break-before-make switching action. The ADG711/ADG712/ADG713 are available in 16-lead TSSOP and 16-lead SOIC packages.
ADG713 Maximum Ratings
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3 V to +6 V Analog, Digital Inputs2 . . . . . . . . . . .0.3 V to VDD +0.3 V or 30 mA, Whichever Occurs First Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 30 mA Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . .100 mA (Pulsed at 1 ms, 10% Duty Cycle max) Operating Temperature Range Industrial (B Version) . . . . . . . . . . . . . . . 40°C to +85°C Storage Temperature Range . . . . . . . . .65°C to +150°C Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .+150°C TSSOP Package, Power Dissipation . . . . . . . . . . . . .430 mW JA Thermal Impedance . . . . . . . . . . . . . . . . . . . . 150°C/W JC Thermal Impedance . . . . . . . . . . . . . . . . . . . . . 27°C/W SOIC Package, Power Dissipation . . . . . . . . . . . . . .520 mW JA Thermal Impedance . . . . . . . . . . . . . . . . . . . . 125°C/W JC Thermal Impedance . . . . . . . . . . . . . . . . . . . . .42°C/W Lead Temperature, Soldering Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . .+215°C Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 kV NOTES 1Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating may be applied at any one time. 2Overvoltages at IN, S or D will be clamped by internal diodes. Current should be limited to the maximum ratings given.
ADG713 Features
`+1.8 V to +5.5 V Single Supply `Low On Resistance (2.5 V Typ) `Low On-Resistance Flatness `3 dB Bandwidth > 200 MHz `Rail-to-Rail Operation `16-Lead TSSOP and SOIC Packages `Fast Switching Times tON 16 ns tOFF 10 ns `Typical Power Consumption (< 0.01 mW) `TTL/CMOS Compatible
ADG713 Typical Application
·Battery Powered Systems ·Communication Systems ·Sample Hold Systems ·Audio Signal Routing ·Video Switching ·Mechanical Reed Relay Replacement