Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The AD5660 parts are a member of the nanoDAC family of devices. They are low power, single, 16-bit buffered voltage-out DACs, guaranteed monotonic by design.
The AD5660x-1 operate from a 3 V single supply featuring an internal reference of 1.25 V and an internal gain of 2. The AD5660x-2/3 operate from a 5 V single supply featuring an internal reference of 2.5 V and an internal gain of 2. Each reference has a 10 ppm/°C max temperature coefficient. The reference associated with each part is available at the REFOUT pin.
The part incorporates a power-on reset circuit that ensures that the DAC output powers up to 0 V (AD5660x-1/2) or midscale (AD5660x-3) and remains there until a valid write takes place. The part contains a power-down feature that reduces the current consumption of the device to 200 nA at 5 V and provides software selectable output loads while in power-down mode.
The AD5660 uses a versatile three-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI™, QSPI™, MICROWIRE™ and DSP interface standards. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved.
The low power consumption of this part in normal operation makes it ideally suited to portable battery operated equipment. The power consumption is 0.7 mW at 5 V reducing to 1 W in power-down mode.
The AD5660 is designed with new technology and is the next generation to the AD53xx family.
AD5660 Maximum Ratings
Parameter
Rating
VDD to GND
−0.3 V to +7 V
Digital Input Voltage to GND
−0.3 V to VDD + 0.3 V
VOUT to GND
−0.3 V to VDD + 0.3 V
Operating Temperature Range Industrial (B Version)
−40°C to +105°C
Storage Temperature Range
−65°C to +150°C
Junction Temperature (TJ max)
150°C
SOT-23 Package Power Dissipation
(TJ max − TA)/JA
JA Thermal Impedance
240°C/W
Lead Temperature, Soldering Vapor Phase (60 sec)
215°C
Infrared (15 sec)
220°C
AD5660 Features
Low power single 16-bit nanoDAC 12-bit accuracy guaranteed On-chip 1.25/2.5 V, 10 ppm/°c reference Tiny 8-lead SOT-23/MSOP package Power-down to 200 nA @ 5 V, 50 nA @ 3 V 3 V/5 V single power supply Guaranteed 16-bit monotonic by design Power-on-reset to zero/midscale Three power-down functions Serial interface with Schmitt-triggered inputs Rail-to-rail operation SYNC interrupt facility
AD5660 Typical Application
Process control Data acquisition systems Portable battery-powered instruments Digital gain and offset adjustment Programmable voltage and current sources Programmable attenuators
AD5660 Connection Diagram
Pin No.
Mnemonic
Description
1
VDD
Power Supply Input. These parts can operate from 2.7 V to 5.5 V. VDD should be decoupled to GND
2
VREFOUT
Reference Voltage Output.
3
VFB
Feedback Connection for the output amplifier. VFB should be connected to VOUT for normal operation.
4
VOUT
Analog Output Voltage from DAC. The output amplifier has rail-to-rail operation.
Level-Triggered Control Input (Active Low). This is the frame synchronization signal for the input data. When SYNC goes low, it enables the input shift register and data is transferred in on the falling edges of the following clocks. The DAC is updated following the 24th clock cycle for the AD5660 and the 16th clock cycle for AD5620/AD5640 unless SYNC is taken high before this edge. In this case, the rising edge of SYNC acts as an interrupt, and the write sequence is ignored by the DAC.
6
SCLK
Serial Clock Input. Data is clocked into the input shift register on the falling edge of the serial clock input. Data can be transferred at rates up to 30 MHz.
7
DIN
Serial Data Input. The AD5660 has a 24-bit shift register, and the AD5620/AD5640 have a 16 -bit shift register. Data is clocked into the register on the falling edge of the serial clock input.
8
GND
Ground Reference Point for all circuitry on the part.