6357S, 63582, 6359 Selling Leads, Datasheet
MFG:MOT Package Cooled:SOP8 D/C:04+
MFG:MOT Package Cooled:SOP8 D/C:04+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: 6358N
File Size: 110736 KB
Manufacturer: SANYO [Sanyo Semicon Device]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: 6358N
File Size: 110736 KB
Manufacturer: SANYO [Sanyo Semicon Device]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: 6358N
File Size: 110736 KB
Manufacturer: SANYO [Sanyo Semicon Device]
Download : Click here to Download
The LM1575 regulator is a monolithic integrated circuit that provides all the active functions for a step-down (buck) switching regulator, capable of driving 1A load with excellent line and load regulation.
Requiring a minimum number of external components, this regulator is simple to use and includes internal frequency compensation and a fixed-frequency oscillator. The LM1575 offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in many cases no heat sink is required.
A standard series of inductors optimized for use with the LM1575 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies.
Other features include a guaranteed +4% tolerance on output voltage within specified input voltages and output load conditions, and +10% on the oscillator frequency. External shutdown is included, featuring 50uA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.
Maximum Supply Voltage
45V
ON/OFF Pin Input Voltage
-0.3V <V< +Vin
Output Voltage to Ground
(Steady State) -1V
Power Dissipation
(Note 2, 3)
Internally Limited
Storage Temperature Range
-65 C to +150 C
Minimum ESD Rating
(C = 100pF, R = 1.5K Ohms) 2KV
Lead Temperature
(Soldering, 10 seconds)
CERDIP, TO220 260 C
TO3 300 C
Maximum Junction Temperature
150 C
Thermal Resistance
ThetaJA
Metal Can (Still Air) 45 C/W
Metal Can (500LF/Min Air flow) 10 C/W
CERDIP (Still Air) 70 C/W
CERDIP (500LF/Min Air flow) 33 C/W
ThetaJC
Metal Can 3.3 C/W
CERDIP (Note 3 applicable to this Pkg only) 2.0 C/W
(Note 3)
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specification apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower.
Note 3: The package material for these devices allows much improved heat transfer over our standard ceramic packages. In order to take full advantage of this improved heat transfer, heat sinking must be provided between the package base (directly beneath the die), and either metal traces on, or thermal vias through, the printed circuit board. Without this additional heat sinking, device power dissipation must be calculated using junction-to-ambient, rather than junction-to-case, thermal resistance. It must not be assumed that the device leads will provide substantial heat transfer out of the package, since the thermal resistance of the leadframe material is very poor, relative to the material of the package base. The stated junction-to-case thermal resistance is for the package material only, and does not account for the additional thermal resistance between the package base and the printed circuit board. The user must determine the value of the additional thermal resistance and must combine this with the stated value for the package, to calculate the total allowed power dissipation for the device.