Features: · Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-423-B and -232-E and ITU Recommendations V.10 and V.28
· Output Slew Rate Control
· Output Short-Circuit-Current Limiting
· Wide Supply Voltage Range
· 8-Pin Package
· Designed to Be Interchangeable With National DS9636A
Application·Audio
·Automotive
·Broadband
·Digital Control
·Military
·Optical Networking
·Security
·Telephony
·Video & Imaging
·Wireless
Pinout
SpecificationsPositive supply voltage range, VCC+(see Note 1)............................ VCC to 15 V
Negative supply voltage range, VCC ............................................0.5 V to 15 V
Output voltage, VO .......................................................................................±15 V
Output current, IO ....................................................................................±150 mA
Continuous total power dissipation ..................................See Dissipation Rating Table
Operating free-air temperature range, TA .......................................... 0°C to 70°C
Storage temperature range, Tstg ................................................. 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds..................... 260°C
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to the network ground terminal.
DescriptionThe uA9636AC is a dual, single-ended line driver designed to meet ANSI Standards EIA/TIA-423-B and EIA/TIA-232-E and ITU Recommendations V.10 and V.28. The slew rates of both amplifiers are controlled by a single external resistor, R(WS), connected between the wave-shape-control (W-S) terminal and GND. Output current limiting is provided. Inputs are compatible with TTL and CMOS and are diode protected against negative transients. uA9636AC operates from ±12 V and is supplied in an 8-pin package.
The uA9636AC is characterized for operation from 0°C to 70°C.
uA9636AC Data Sheet
