max9100

Supply Voltage (V_CCto GND).................................-0.3V to +6V
IN+ or IN- to GND.....................................-0.3V to (VCC+ 0.3V)

Output Voltages to GND
MAX9100..................................................-0.3V to (VCC+ 0.3V)
MAX9101...............................................................-0.3V to +6V
Output Short-Circuit Duration (to V_CC or GND)........Continuous
Continuous Power Dissipation (T_A = +70°C)
5-Pin Plastic SOT23
(derate 7.3mW/°C above +70°C)...............................571mW

8-Pin Plastic SO
(derate 5.88mW/°C above +70°C).............................471mW
Operating Temperature Range......................-40°C to +85°C
Junction Temperature..................................................+150°C
Storage Temperature Range........................-65°C to +150°C
Lead Temperature (soldering, 10s)..............................+300°C

The max9100/MAX9101 micropower comparators are optimized for single-cell systems, and are fully speci- fied for operation from a single supply of +1.0V to +5.5V. This ultra-low voltage operation, 5µA quiescent current consumption, and small footprint make the max9100/MAX9101 ideal for use in battery-powered systems. A wide-input common-mode range that includes the negative rail and Rail-to-Rail®output swing allows almost all of the power supply to be used for sig- nal voltage. In addition, propagation delay of max9100 is less than 4µs, and rise and fall times are 100ns.

The max9100 features a push-pull CMOS output stage that sinks and sources current with large internal output drivers that allow rail-to-rail output swings with loadsupto 5mA.TheMAX9101 has an open-drain output stage that makes it suitable for mixed-voltage designs.
The max9100/MAX9101 are available in tiny SOT23-5packages.