PinoutSpecifications Rating Symbol Value Unit Power Supply Voltage VCC 40 V Op Amp Power Supply Voltage VCC (Op Amp) 40 V Common Mode Input Range(Comparator and Op Amp) VICR 0.3 to VCC V Differential Input Voltage (Note 2) VID ± 30...
mA78S40: PinoutSpecifications Rating Symbol Value Unit Power Supply Voltage VCC 40 V Op Amp Power Supply Voltage VCC (Op Amp) 40 V Common Mode Input Range(Comp...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Rating |
Symbol |
Value |
Unit |
Power Supply Voltage |
VCC |
40 |
V |
Op Amp Power Supply Voltage |
VCC (Op Amp) |
40 |
V |
Common Mode Input Range (Comparator and Op Amp) |
VICR |
0.3 to VCC |
V |
Differential Input Voltage (Note 2) |
VID |
± 30 |
V |
Output Short Circuit Duration (Op Amp) |
Continuous |
||
Reference Output Current |
Iref |
10 |
mA |
Voltage from Switch Collectors to Gnd |
40 |
V | |
Voltage from Switch Emitters to Gnd |
40 |
V | |
Voltage from Switch Collectors to Emitter |
40 |
V | |
Voltage from Power Diode to Gnd |
40 |
||
ReversePower Diode Voltage |
VDR |
40 |
V |
Current through Power Switch |
ISW |
1.5 |
A |
Current through Power Diode |
ID |
1.5 |
A |
Power Dissipation and Thermal Characteristics: Plastic Package (TA = + 25°C) Derate above + 25°C (Note 1) |
PD 1/RqJA |
1500 14 |
mW mW/°C |
Storage Temperature Range |
Tstg |
65 to + 150 |
°C |
Operating Temperature Range mA78S40V mA78S40C |
TA |
40 to +85 0 to +70 |
°C |
The mA78S40 is a switching regulator subsystem, consisting of a temperature compensated voltage reference, controlledduty cycle oscillator with an active current limit circuit, comparator, highcurrent and highvoltage output switch, capable of 1.5 A and 40 V, pinnedout power diode and an uncommitted operational amplifier, which can be powered up or down independent of the IC supply. The switching output can drive external NPN or PNP transistors when voltages greater the 40 V, or currents in excess of 1.5 A, are required. Some of the features are widesupply voltage range, low standby current, high efficiency and low drift. The mA78S40 is available in commercial (0° to + 70°C), and automotive (40° to + 85°C) temperature ranges.
Some of the applications include use in stepup, stepdown, and inverting regulators, with extremely good results obtained in batteryoperated systems.
• Output Adjustable from 1.25 V to 40 V
• Peak Output Current of 1.5 A Without External Transistor
• 80 dB Line and Load Regulation
• Operation from 2.5 V to 40 V Supply
• Low Standby Current Drain
• High Gain, High Output Current, Uncommitted Op Amp