Features: • 3.3 V, 5.0 V, 12 V, 15 V, and Adjustable Output Versions
• Adjustable Version Output Voltage Range of 1.23 V to 37 V ±4%Maximum Over Line and Load Conditions
• Guaranteed 1.0 A Output Current
• Wide Input Voltage Range: 4.75 V to 40 V
• Requires Only 4 External Components
• 52 kHz Fixed Frequency Internal Oscillator
• TTL Shutdown Capability, Low Power Standby Mode
• High Efficiency
• Uses Readily Available Standard Inductors
• Thermal Shutdown and Current Limit ProtectionApplication• Simple and HighEfficiency StepDown (Buck) Regulators
• Efficient PreRegulator for Linear Regulators
• OnCard Switching Regulators
• Positive to Negative Converters (BuckBoost)
• Negative StepUp Converters
• Power Supply for Battery ChargersSpecifications
| Rating |
Symbol |
Value |
Unit |
| Maximum Supply Voltage |
Vin |
45 |
V |
| ON/OFF Pin Input Voltage |
− |
−0.3 V 3 V 3 +Vin |
V |
| Output Voltage to Ground (Steady−State) |
− |
−1.0 |
V |
|
Power Dissipation
Case 314B and 314D (TO−220, 5−Lead)
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
Case 936A (D2PAK)
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
|
PD
RJA
RJC
PD
RJA
RJC |
Internally Limited
65
5.0
Internally Limited
70
5.0
|
W
°C/W
°C/W
W
°C/W
°C/W |
| Storage Temperature Range |
Tstg |
−65 to +150 |
°C |
| Minimum ESD Rating (Human Body Model: C = 100 pF, R = 1.5 k) |
− |
2.0 |
kV |
| Lead Temperature (Soldering, 10s) |
− |
260 |
°C |
| Maximum Junction Temperature |
TJ |
150 |
°C |
DescriptionThe lm2575 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a stepdown switching regulator (buck converter). All circuits of this series are capable of driving a 1.0 A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5.0 V, 12 V, 15 V, and an adjustable output version.
These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimised for use with the LM2575 are offered by several different inductor manufacturers.
The lm2575 series of monolithic integrated circuits provide all the active functions for a step-down (buck) switching regulator. Fixed versions are available with a 3.3V, 5V, 12V, or 15V fixed output. Adjustable versions have an output voltage range from 1.23V to 37V. Both versions are capable of driving a 1A load with excellent line and load regulation.
These regulators are simple to use because they require a minimum number of external components and include internal frequency compensation and a fixed-frequency oscillator.
The lm2575 series offers a high efficiency replacement for popular three-terminal adjustable linear regulators. It substantially reduces the size of the heat sink, and in many cases no heat sink is required.
A standard series of inductors available from several different manufacturers are ideal for use with the LM2575 series. This feature greatly simplifies the design of switch-mode power supplies.
The feedback voltage is guaranteed to ±2% tolerance for adjustable versions, and the output voltage is guaranteed to ±3% for fixed versions, within specified input voltages and output load conditions. The oscillator frequency is guaranteed to ±10%. External shutdown is included, featuring less than 200µA standby current. The output switch includes cycle-by-cycle current limiting and thermal shutdown for full protection under fault conditions.
lm2575 Data Sheet
