Features: Complete smart battery management solution for Li-Ion battery packs Accurate measurement of available battery capacity Provides overvoltage,undervoltage,and overcurrent protectionDesigned for battery pack integration: Smallsize Includes bq2040 and bq2058 ICs, and configurationEEPROM O...
bq2148: Features: Complete smart battery management solution for Li-Ion battery packs Accurate measurement of available battery capacity Provides overvoltage,undervoltage,and overcurrent protectionDesigned ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Value | Unit | Notes |
VOP | Supply voltage (B1P to B4N) | 18 | V | DC |
VTR | Maximum transient voltage (B1P to B4N) | 32 | V | Maximum duration = 1.5s |
VCHG | Charging voltage | 18 | V | |
ICHG | Continuous charge/discharge current | 3.9 | A | VOP > 6V TA = 25°C |
TOPR | Operatingtemperature | 0 to +70 | °C | Commercial |
TSTR | Storage temperature | -55 to +125 | °C |
The bq2148 Smaart Battery Module provides a complete and compact battery management solution for Li-Ion battery packs. Designed for battery pack integration, the bq2168 combines the bq2040H Gas Gauge IC with the bq2058 Supervisor IC on a small printed circuit board. The board includes all the necessary components to accurately monitor battery capacity and protect the cells from overvoltage, undervoltage, and overcurrent conditions. The boardworkswiththreeorfourLi-Ionseriescells.
The Gas Gauge IC bq2148 uses the on-board sense resistor to track charge and discharge activity of the battery pack. Critical battery information can be accessed through the serial communications port at SMBC/SMBD. The bq2148 uses the SMBus communications protocol and supports the Smart Battery Data Commands in the SBD specification. The supervisor circuit of bq2148 consists of the bq2058 and two FETs. The bq2058 controls the FETs to protect the batteries during charge/discharge cycles and short circuit conditions. The bq2168 provides contacts for the positive and negative terminals of each battery in the stack. Please refer to the bq2040 and bq2058 data sheets for the specifics on the operation of the power gaugeandsupervisorICs.
Unitrode configures the bq2168 based on the information requested in Table 1. The configuration defines all the EEPROM parameters and the protection threshold. Figure1showshowthemoduleconnectstothecells.
The bq2148L includes four LEDs to display remaining capacity in 25% increments of the learned capacity. The LEDs are ctivatedwiththeonboardpush-buttonswitch.
A module development kit is also available for the bq2148. The bq2148B-KT or the bq2148LB-KT includes oneconfiguredmoduleandthefollowing:
1) An EV2200-40 interface board that allows connection to the serial port of any AT-compatible computer.
2) Menu driven software to display charge/discharge activity and to allow user interface to the bq2040 fromanystandardWindows3.1xor95PC.