Features: · Fast charge of nickel cadmium or nickel-metal hydride batteries· Direct LED output displays charge status· Fast-charge termination by rate of rise of temperature, maximum voltage, maximum temperature, and maximum time· Internal band-gap voltage reference· Optional top-off charge (...
bq2002T: Features: · Fast charge of nickel cadmium or nickel-metal hydride batteries· Direct LED output displays charge status· Fast-charge termination by rate of rise of temperature, maximum voltage, max...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Minimum | Maximum | Unit | Conditions |
VCC | DC voltage applied on VCC relative to VSS | -0.3 | +7.0 | V | |
VT | DC voltage applied on any pin excluding VCC relative to VSS |
-0.3 | +7.0 | V | |
TOPR | Operating temperature | 0 | +70 | °C | Commercial |
TSTG | Storage temperature | -40 | +85 | °C | |
TBIAS | Temperature under bias | - | +260 | °C | 10 sec max. |
TSOLDER | Soldering temperature | -40 | +85 | °C | |
Note: Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation should be limited to the Recommended DC Operating Conditions detailed in this data sheet. Exposure to conditions beyond the operational limits for extended periods of time may affect device reliability. |
The bq2002D/T Fast-Charge IC are low-cost CMOS battery-charge controllers able to provide reliable charge termination for both NiCd and NiMH battery applications. Controlling a current-limited or constant-current supply allows the bq2002D/T to be the basis for a cost-effective stand-alone or system-integrated charger. The bq2002D/T integrates fast charge with optional top-off and pulsed-trickle control in a single IC for charging one or more NiCd or NiMH battery cells.
Fast charge of bq2002T is initiated on application of the charging supply or battery replacement. For safety, fast charge is inhibited if the battery temperature and voltage are outside configured limits.
Fast charge is terminated by any of the following: Rate of temperature rise Maximum voltage Maximum temperature Maximum time After fast charge, the bq2002T optionally tops-off and pulse-trickles the battery per the pre-configured limits.
Fast charge of bq2002T may be inhibited using the INH pin. The bq2002D/T may be placed in low-standby-power mode to reduce system power consumption.