Features: · 1 A Low-Dropout Voltage Regulator· Available in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, 5.0-V Fixed Output and Adjustable Versions· Dropout Voltage Down to 230 mV at 1 A (TPS76750)· Ultralow 85 · A Typical Quiescent Current· Fast Transient Response· 2% Tolerance Over Spe...
TPS76701Q: Features: · 1 A Low-Dropout Voltage Regulator· Available in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, 5.0-V Fixed Output and Adjustable Versions· Dropout Voltage Down to 230 mV at 1 A (TPS...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Because the PMOS device TPS76701Q behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76750) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current of TPS76701Q is very low and independent of output loading (typically 85 A over the full range of output current, 0 mA to 1 A). These two key specifications of TPS76701Q yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to 1 A at TJ = 25°C.
The RESET output of the TPS76701Q initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS76701Q monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage.
The TPS76701Q is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.5 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS76701Q is available in 8-pin SOIC and 20-pin PWP packages.