High Speed Optocouplers 1MBd 2Ch 16mA
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Current Transfer Ratio : | 50 % | Maximum Baud Rate : | 1 Mbps | ||
Maximum Forward Diode Voltage : | 1.8 V | Maximum Reverse Diode Voltage : | 5 V | ||
Maximum Input Diode Current : | 25 mA | Maximum Power Dissipation : | 45 mW | ||
Maximum Operating Temperature : | + 100 C | Minimum Operating Temperature : | - 55 C | ||
Package / Case : | PDIP-8 | Packaging : | Tube |
Parameter | Symbol |
Value |
Units |
|
Storage Temperature | TSTG |
-55 to +125 |
°C |
|
Operating Temperature | TOPR |
-55 to +100 |
°C |
|
Lead Solder Temperature | TSOL |
260 for 10 sec |
°C |
|
EMITTER DC/Average Forward Input Current |
Each Channel (Note 1) |
IF(avg) |
25 |
mA |
Peak Forward Input Current (50% duty cycle, 1 ms P.W.) | Each Channel (Note 2) |
IF(pk) |
50 |
mA |
Peak Transient Input Current - ( 1 s P.W., 300 pps) | Each Channel |
IF(trans) |
1.0 |
A |
Reverse Input Voltage | Each Channel |
VR |
5 |
V |
Input Power Dissipation | (6N135/6N136 and HCPL-2503/4502) (HCPL-2530/2531 ) Each Channel (Note 3) |
PD |
100 45 |
mW |
DETECTOR Average Output Current |
Each Channel |
IO(avg) |
8 |
mA |
Peak Output Current | Each Channel |
IO(pk) |
16 |
mA |
Emitter-Base Reverse Voltage | (6N135, 6N136 and HCPL-2503 only) |
VEBR |
5 |
V |
Supply Voltage | VCC |
-0.5 to 30 |
V |
|
Output Voltage | VO |
-0.5 to 20 |
V |
|
Base Current | (6N135, 6N136 and HCPL-2503 only) |
IB |
5 |
mA |
Output power dissipation |
(6N135, 6N136, HCPL-2503, HCPL-4502) (Note 4) |
PD |
100 |
mW |
(HCPL-2530, HCPL-2531) Each Channel |
35 |
mW |
The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor.
A separate connection for the bias of the HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor.An internal noise shield provides superior common mode rejection of 10kV/s. An improved package allows superior insulation permitting a 480 V working voltage compared to industry standard of 220 V.
Technical/Catalog Information | HCPL-2531 |
Vendor | Avago Technologies US Inc. |
Category | Isolators |
Isolation Voltage | 2500Vrms |
Input Type | DC |
Output Type | Transistor with Vcc |
Current - Output/Channel | 8mA |
Voltage - Output | 20V |
Vce Saturation (Max) | - |
Current Transfer Ratio (Min) | 19% @ 16mA |
Mounting Type | Through Hole |
Package / Case | 8-DIP |
Packaging | Tube |
Number of Circuits | 2 - Dual |
Lead Free Status | Contains Lead |
RoHS Status | RoHS Non-Compliant |
Other Names | HCPL 2531 HCPL2531 516 1044 5 ND 51610445ND 516-1044-5 |