A6D

Features:






Specifications






Description

      This is the description about A6D of the Sealed DIP Switch.
      Here are the features of A6D: Designed to standards of DIL-IC; top actuated types are auto insertable; Bifurcated movable contacts offer superb reliability; Smooth, sure switching action..
      The Precautions of A6D are here. The terminal pitch of all OMRON DIP switches is the same as a digital IC chip, which has a 2.54mm pitch. Moreover, Models A6C and A6D DIP switches are also identical to an DIL-IC chip in shape, so that they can be mounted on a PC board in exactly the same manner as ordinary IC chips.
When using these A6D OMRON DIP switches, pay attention to the following points: Circuit Design: Design the circuit for the DIP switch so that the switch can be used within the rated voltage and current ranges. The rated maximum voltage and current must not be exceeded (even momentarily) when the switch breaks or makes contact. The rated minimum current is 10A (at 3.5 VDC). When CMOS iCs are used on the same PC board as the DIP switch, the momentary current applied to the DIP switch can be increased to improve the contact reliability on some occasions. At this time, however, the peak value of the current must not exceed the rated maximum value. Operation: 1 Use the tip of a standard screwdriver or similar object to operate the rotary DIP switch Use an appropriately sized screwdriver. If the tip is too large or small, the groove of the actuator may be damaged or deformed. 2. The actuators of a slide type DIP switch can be moved by a stick or ball-point pen having a round tip. Do not use sharp edged objects such as tweezers. 3. The top actuated types and side actuated types of the slide DIP switches can also be operated with the fingers.
      At present there is not too much information about A6D. If you are willing to find more about the A6D, please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.