Features: • 4.5A continuous current• Up to 10A peak current• Very low saturation voltages• High gainApplication• High side switch• Battery charging• Regulator circuits• Buck converters• MOSFET gate driversSpecifications Part Number ZXTP2...
ZXTP25012EZ: Features: • 4.5A continuous current• Up to 10A peak current• Very low saturation voltages• High gainApplication• High side switch• Battery charging• Regulat...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: •2 Amps continuous current•Up to 5 Amps peak current•Very low saturati...
US $.51 - .87 / Piece
Transistors Bipolar (BJT) 200V PNP Low Vce 2A Ic Vceo -200V
Features: • 2 Amps continuous current• Up to 5 Amps peak current• Very low satur...
Part Number | ZXTP25012EZ |
Product Type | PNP |
VCEO(V) | -12 |
IC (A) | -4.5 |
ICM (A) | -10 |
PD (W) | 2.4 |
hFE Min | 500 40 |
hFE Max | 1500 |
@ IC (A) | -0.01 -4.5 |
VCE (SAT) Max (mV) | -70 -355 |
@ IC (A) | -1 -2 |
@ IB (mA) | -100 -40 |
fT Min (MHz) | 310 |
RCE (SAT) (m) | 45 |
Parameter | Symbol | Limit | Unit |
Collector-Base voltage | VCBO | -20 | V |
Collector-Emitter voltage | VCEO | -12 | V |
Emitter-Base voltage | VEBO | -7 | V |
Continuous Collector current(c) | IC | -4.5 | A |
Base current | IB | -1 | A |
Peak pulse current | ICM | -10 | A |
Power dissipation at TA =25(a) Linear derating factor |
PD | 1.1 8.8 |
W mW/ |
Power dissipation at TA =25(b) Linear derating factor |
PD | 1.8 14.4 |
W mW/ |
Power dissipation at TA =25(c) Linear derating factor |
PD | 2.4 19.2 |
W mW/ |
Power dissipation at TA =25(d) Linear derating factor |
PD | 4.46 35.7 |
W mW/ |
Power dissipation at TA =25(d) Linear derating factor |
PD | 19.2 153 |
W mW/ |
Operating and storage temperature range | Tj, Tstg | - 55 to 150 |
NOTES:
(a) For a device surface mounted on 15mm x 15mm x 0.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions.
(b)Mounted on 25mm x 25mm x 0.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions.
(c) Mounted on 50mm x 50mm x 0.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions.
(d)As (c) above measured at t<5 seconds.
(e) Junction to case (collector tab). Typical
Packaged in the ZXTP25012EZ outline this new low saturation 12V PNP transistor offers extremely low on state losses making it ideal for use in DC-DC circuits and various driving and power management functions.