Features: • 5-pin SC70 package for the ultimate in space saving
• 5-pin SOT23 industry standard pinout
• Low 85mV dropout at 50mA load
• 50A ground pin current with full 150mA load
• Typically less than 10nA ground pin current on shutdown
• 2.5, 2.6, 2.8, 3, 3.3 and 4 volts output
• Very low noise, without bypass capacitor
• Thermal overload and over-current protection
• -40 to +85°C operating temperature rangeApplication• Cellular and Cordless phones
• Palmtop and laptop computers
• PDA
• Hand held instruments
• Camera, Camcorder, Personal Stereo
• PCMCIA cards
• Portable and Battery-powered equipmentPinout
SpecificationsTerminal Voltage with respect to GND
VIN -0.3V to 7.0V
EN -0.3V to 10V
VO -0.3V to 5.5V
Package Power Dissipation (TA=25°C)
SC70 300mW (Note 1)
SOT23-5 450mW (Note 1)
Output short circuit duration Infinite
Continuous Power Dissipation Internally limited
Operating Temperature Range -40°C to +85°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum conditions for extended periods may affect device reliability.
Storage Temperature Range -55°C to +125°C
DescriptionThe ZXCL series ZXCL280 are very small low dropout regulators designed for use in low power and severely space limited applications.
The devices ZXCL280 operate with a low dropout voltage, typically of only 85mV at 50mA load. Supply current is minimised with a ground pin current of only 50A at full 150mA load. Logic control allows the devices to be shut down, consuming typically less than 10nA. These features make the device ideal for battery powered applications where power economy is critical.
The parts ZXCL280 have been designed with space sensitive systems in mind. They are available in the ultra small SC70 package, which is half the size of other SOT23 based regulator devices.
For applications requiring improved performance over alternative devices, the ZXCL is also offered in the 5 pin SOT23 package with an industry standard pinout.
The devices ZXCL280 feature thermal overload and over-current protection and are available with output voltages of 2.5V, 2.6V, 2.8V, 3V, 3.3V and 4V. Other voltage options between 1.5V and 4V can be provided. Contact Zetex marketing for further information.
The ZXCL series ZXCL280 are manufactured using CMOS processing, however advanced design techniques mean that output noise is improved even when compared to other bipolar devices.
ZXCL280 Data Sheet
