Features: · Output Voltages from 1.5 to 3.3 Volts· 20 Amps Output Current· Synchronous Rectification· Efficiency up to 88%· Nominal 28 Volt Input· Total Ionizing Dose > 100KRad (Si)· No SEE to LET > 80 MeV•cm 2 /mg· -40°C to +85°C Operating Range· Short Circuit Protection· Remote Sensi...
Z-ZERIES: Features: · Output Voltages from 1.5 to 3.3 Volts· 20 Amps Output Current· Synchronous Rectification· Efficiency up to 88%· Nominal 28 Volt Input· Total Ionizing Dose > 100KRad (Si)· No SEE to LE...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· Output Voltages from 1.5 to 3.3 Volts
· 20 Amps Output Current
· Synchronous Rectification
· Efficiency up to 88%
· Nominal 28 Volt Input
· Total Ionizing Dose > 100KRad (Si)
· No SEE to LET > 80 MeV•cm 2 /mg
· -40°C to +85°C Operating Range
· Short Circuit Protection
· Remote Sensing
· Adjustable Output Voltage
· Flexible Mounting Configuration
· High Power Density
· Derating To MIL-STD-975, MIL-STD-1547, GSFC-PPL-21
· Fully Isolated - Input to Output and to Case
· Complimentary EMI Filter Available
· Base Plate Conduction Cooling
The Z-Series of DC/DC converter modules Z-ZERIES has been specifically designed in response to the need for low voltage at moderate current levels supplied with the high efficiency and tight regulation dictated by modern digital processing applications. These converters are designed specifically for operation in radiation environments that are presented to commercial communication satellites operating in long term GEO and LEO orbits. They have been created to complement the spectrum of electrical and radiation performance available in the Advanced Analog ART2815T and M3G-Series converters. Requirements occurring in space vehicles operating in Geostationary orbits, launch boosters, scientific space probes Z-ZERIES and similar applications requiring a low voltage, high efficiency converter with well characterized radiation hardness performance will be optimally satisfied by the Z-Series converters.
An additional benefit of the Z-Series Z-ZERIES is high power density. This is facilitated by utilizing the best features of chip and wire hybrid technology and surface mount fabrication techniques. The hybrid portion is fabricated in a facility fully qualified to MIL-PRF-38534 and processed to class K requirements. The standard processing adopted for the Z-Series module has been created to assure with margin the reliability required for space applications. Applicable generic lot qualification test data including radiation performance will be made available on request. Variations to the standard screening may be accommodated. Consult IR Santa Clara for special requirements.