XRT83VSH316

` Fully integrated 16-Channel short haul transceivers for T1/J1 (1.544MHz) and E1 (2.048MHz) applications
` Parallel or SPI Microprocessor Interface
` T1/E1/J1 short haul and clock rate are per port selectable through software without changing components
` Internal Impedance matching on both receive and transmit for 75 (E1), 100 (T1), 110 (J1), and 120 (E1) applications are per port selectable through software without changing components
` Power down on a per channel basis with independent receive and transmit selection
` Five pre-programmed transmit pulse settings for T1 short haul applications per channel
` User programable Arbitrary Pulse mode for T1 and E1
` On-Chip transmit short-circuit protection and limiting protects line drivers from damage on a per channel basis
` Crystal-Less digital jitter attenuators (JA) with 32-Bit or 64-Bit FIFO for the receive or transmit path per channel
` Driver failure monitor output (DMO) alerts of possible system or external component problems
` Transmit outputs and receive inputs may be "High" impedance for protection or redundancy applications on a per channel basis
` Support for automatic protection switching
` 1:1 and 1+1 protection without relays
` Receive monitor mode handles 0 to 6dB resistive attenuation (flat loss) along with 0 to 6dB cable loss for both T1 and E1
` Loss of signal (LOS) according to ITU-T G.775/ETS300233 (E1) and ANSI T1.403 (T1/J1) for system (SLOS) and line (RLOS) side diagnostics
` Programmable data stream muting upon RLOS detection
` On-Chip HDB3/B8ZS encoder/decoder with an internal 16-bit LCV counter for each channel
` On-Chip digital clock recovery circuit for high input jitter tolerance
` QRSS/PRBS pattern generator and detection for testing and monitoring for system (SPRBS) and line (PRBS) side diagnostics
` Error and bipolar violation insertion and detection
` Transmit all ones (TAOS) Generators and Detectors for system (SAIS) and line (AIS) side diagnostics
` Supports local analog, remote, digital, and dual loopback modes
` Supports gapped clocks for mapper/multiplexer applications
` 1.8V Digital Core
` 3.3V I/O and Analog Core
` 316-Pin STBGA package
` -40 to +85 Temperature Range