Features: •1.62 to 3.6 Volt Operation•Selectable I2C/SPI Interface•Full-featured UART-Data rate of up to 16 Mbps at 3.3 V-Data rate of up to 12.5 Mbps at 2.5 V-Data rate of up to 8 Mbps at 1.8 V-Fractional Baud Rate Generator-Transmit and Receive FIFOs of 64 bytes-16 Selectable T...
XR20M1170: Features: •1.62 to 3.6 Volt Operation•Selectable I2C/SPI Interface•Full-featured UART-Data rate of up to 16 Mbps at 3.3 V-Data rate of up to 12.5 Mbps at 2.5 V-Data rate of up to 8...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $142.8 - 153 / Piece
UART Interface IC Supports M1170 16 ld TSSOP, I2C Interface
US $142.8 - 153 / Piece
UART Interface IC Supports M1170 16 ld TSSOP, SPI Interface
US $142.8 - 153 / Piece
UART Interface IC Supports M1170 24 ld TSSOP, I2C Interface
Specifications | |
CH | 1 |
CPUInterface | I2C/SPI |
Data Rate@5/3.3/2.5V | na/16/12.5 |
Tx/RxFIFO(Bytes) | 64/64 |
Tx/RxFIFOCtrs | Yes |
Tx/RxFIFOINT Trig | Yes |
AutoRTS/CTS | Yes |
IrDaSup | Yes |
5VTolInputs | No |
Sup V | 1.62-3.63 |
Pkgs | TSSOP-16, TSSOP-24, QFN-16, QFN-24, QFN-28 |
The XR20M1170¹ (M1170) is a high performance universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs and a selectable I²C/SPI slave interface. The M1170 operates from 1.62 to 3.63 volts. The enhanced features in the M1170 include a programmable fractional baud rate generator, and 8X and 4X sampling rate that allows for a maximum baud rate of 16 Mbps at 3.3V. The XR20M1170 standard features include 16 selectable TX and RX FIFO trigger levels, automatic hardware (RTS/CTS) and software (Xon/Xoff) flow control, and a complete modem interface. Onboard registers provide the user with operational status and data error flags. An internal loopback capability allows system diagnostics. The M1170 is available in the 28-pin QFN, 24-pin QFN, 16-pin QFN, 24-pin TSSOP and 16-pin TSSOP packages. The 28-pin QFN package has the EN485# and ENIR# pins to allow the UART to power-up in the Auto RS485 mode or the Infrared mode.
NOTE: ¹Covered by U.S. Patent #5,649,122
For UART technical support or to obtain an IBIS model for this product, please email Exar's UART Technical Support group.