XE6216

·Max Output Current : More than 150mA (200mA limit) (V_IN=V_OUT(T)+3.0V)
·Dropout Voltage
·Input Voltage Range
·Output Voltage
·Setting Range
: 300mV@IOUT=20mA
: 2.0V~28.0V
: 2.0V~12.0V (100mV increments) 2.0V~23V with external resistors
·High Accuracy : Setting Voltage Accuracy􀊶2% (Setting Voltage Accuracy􀊶1% Possible)
·Low Power Consumption : 5􀐖A
·Stand-by Current : Less than 0.1􀐖A
·High Ripple Rejection : 30dB@1kHz
·Operating Temperature : -40􀋆~+85􀋆
·Low ESR Capacitor : Ceramic Capacitor Compatible
·Current Limit Circuit Built-In
·Thermal Shutdown Circuit Built-In
·Small Packages : SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, TO-252

*1: I_OUT􀊽Pd / (V_IN-V_OUT)

XC6216/XE6216 series are positive voltage regulator ICs with 28V of operation voltage. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor.

The output voltage is selectable in 100mV increments within the range of 2.0V to 12V using laser trimming  echnologies.
With external resistors, the output voltage range can be expanded from 2.0V to 23V. The series' output stabilization
capacitor (CL) is also compatible with low ESR ceramic capacitors.

The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level.􀃧

The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption.