XE0052SIP

The XE0052SIP, XE0054SIP and XE0054T are compact, low-cost, FCC part 68 compliant, telephone inter-face modules. The XE0052SIP has an internal 2-4 wire convertor to separate transmit and receive signals. All models provide ring indication and off hook input to control line access. They operate from single +5 volt power supply and occupy just 0.7 square inches of board space. The XE0052SIP, XE0054SIP and XE0054T meet the requirements for V.32bis operation, voice grade applications such as voice, DTMF, group 3 fax, and low-speed data transfer.

The XE0052SIP has its own characteristics. Here lists some of its important features. The first one is: small size, maximum envelop is 1.5"*0.5"*0.45". The second one is: FCC part 68 compliant. The third one is: XE0052SIP includes 2-4 wire convertor. The fourth one is about ring detection, the XE0052SIP/XE0054SIP is ring envelope, and the XE0054T is ring frequency pulses. The fifth one is: single +5V operation. The sixth one is: hook switch control. And the last one is: compatible with V.32bis data transfer.

Next are some electrical specification of the XE0052SIP, XE0054SIP and XE0054T. The type value of power supply current is 10mA, and its maximum is 15mA. The transmit insertion loss at 1000hz, its type value is 0 dB, and the receive insertion loss at 1000hz, its type value is also 0 dB. The ring detect sensitivity (on-hook) is 38 Vrms. The coupler match input impedance is 536 Ohms. The minimum of the ring detect peak current is 100 uA, and the maximum of the ring detect idle current is 10uA. The type value of the ring indicate output voltage is 0.2 volts and its maximum is 0.5 volts.

For more information about the XE0052SIP, XE0054SIP and XE0054T, please pay attention to our web, the web site is www.ChinaICMart.com or www.seekic.com.