Features: • Ultra high-performance EPLD 5 ns pin-to-pin speed on all fast inputs 167 MHz maximum clock frequency• New low power XC7336Q• 100% routable with 100% utilization• Incorporates four PAL-like 24V9 Fast Function Blocks• 36 Output Macrocells Programmable I/O ar...
XC7336: Features: • Ultra high-performance EPLD 5 ns pin-to-pin speed on all fast inputs 167 MHz maximum clock frequency• New low power XC7336Q• 100% routable with 100% utilization• ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter |
Value |
Units |
VCC | Supply voltage with respect to GND |
-0.5 to 7.0 |
V |
VIN | DC Input voltage with respect to GND |
-0.5 to VCC +0.5 |
V |
VTS | Voltage applied to 3-state output with respect to GND |
-0.5 to VCC +0.5 |
V |
TSTG | Storage temperature |
-65 to +150 |
°C |
TSOL | Maximum soldering temperature (10s @ 1/16 in. = 1.5 mm) |
+250 |
°C |
Warning: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may affect device reliability.
The XC7336 is a member of the Xilinx XC7300 EPLD family. It consists of four PAL-like 24V9 Fast Function Blocks interconnected by the 100%-populated Universal Interconnect Matrix (UIMÔ).
Each Fast Function Block has 24 inputs and contains nine Macrocells configurable for registered or combinational logic. The nine Macrocell outputs feed back to the UIM and can simultaneously drive the output pads.
The UIM allows 100% connectivity between all function blocks and input pins, providing the ability to utilize 100% of the device while eliminating routing issues. The XC7336 is designed in 0.8m CMOS EPROM technology, in speed grades ranging from 5 to15 ns. The XC7336Q is also available now, providing lower power consumption in -10, -12 and -15 ns speed grades.
Device logic is automatically configured to the user's speci- fications using the XEPLD software. The XEPLD software is capable of optimizing and collapsing logic. The SMARTswitch software/hardware feature allows implementation of buried combinatorial logic functions in the UIM, thus increasing device utilization. The XEPLD software supports third party schematic capture and HDL entry tools, as well as direct equation-based text files. Using a workstation or PC platform, designs are automatically mapped into the XC7336 in a matter of minutes.