Features: • Single 3 V Power Supply• Typical Power Dissipation of 12 mW, PowerDown of 0.01 mW• Fully Differential Analog Circuit Design for Lowest Noise• Transmit BandPass and Receive LowPass Filters OnChip• Active RC PreFiltering and PostFiltering• MuLaw and AL...
XC145481: Features: • Single 3 V Power Supply• Typical Power Dissipation of 12 mW, PowerDown of 0.01 mW• Fully Differential Analog Circuit Design for Lowest Noise• Transmit BandPass an...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The XC145481 is a general purpose per channel PCM CodecFilter with pin selectable MuLaw or ALaw companding, and is offered in 20pin DIP, SOG, and SSOP packages. This device performs the voice digitization and reconstruction as well as the band limiting and smoothing required for PCM systems. This XC145481 device is designed to operate in both synchronous and asynchronous applications and contains an onchip precision reference voltage.
This XC145481 device has an input operational amplifier whose output is the input to the encoder section. The encoder section immediately lowpass filters the analog signal with an active RC filter to eliminate very high frequency noise from being modulated down to the passband by the switched capacitor filter. From the active RC filter, the analog signal is converted to a differential signal. From this point, all analog signal processing is done differentially. This allows processing of an analog signal that is twice the amplitude allowed by a singleended design, which reduces the significance of noise to both the inverted and noninverted signal paths. Another advantage of this differential design is that noise injected via the power supplies is a commonmode signal that is cancelled when the inverted and noninverted signals are recombined. This dramatically improves the power supply rejection ratio.
After the differential converter, a differential switched capacitor filter bandpasses the analog signal from 200 Hz to 3400 Hz before the signal is digitized by the differential compressing A/D converter. The XC145481 decoder accepts PCM data and expands it using a differential D/A converter. The output of the D/A is lowpass filtered at 3400 Hz and sinX/X compensated by a differential switched capacitor filter. The signal is then filtered by an active RC filter to eliminate the out of band energy of the switched capacitor filter.
The XC145481 PCM CodecFilter accepts a variety of clock formats, including Short Frame Sync, Long Frame Sync, IDL, and GCI timing environments.
The XC145481 PCM CodecFilter utilizes CMOS due to its reliable lowpower performance and proven capability for complex analog/digital VLSI functions.