X9511

Features:

• Push Button Controlled
• Low Power CMOS
-Active Current, 3mA Max
-Standby Current, 200A Max
• 31 Resistive Elements
-Temperature Compensated
-±20% End to End Resistance Range
-5V to +5V Range
• 32 Wiper Tap Points
-Wiper Positioned via Two Push Button Inputs
-Slow & Fast Scan Modes
-AUTOSTORE Option
-Manual Store Option
-Wiper Position Stored in Nonvolatile Memory and Recalled on Power-Up
• 100 Year Wiper Position Data Retention
• X9511Z = 1K
• X9511W = 10K
• Packages
-8-Lead PDIP
-8-Lead SOIC




Pinout






Specifications

Temperature under Bias ................... 65°C to +135°C
Storage Temperature........................ 65°C to +150°C
Voltage on PU, PD, and V_CC
with Respect to V .............................1V to +7V
Voltage on V_H and V_L
Referenced to V_SS ........................................8V to +8V
V = |V_HV_L|
X9511Z..................................................................4V
X9511W ............................................................ 10V
Lead Temperature (Soldering 10 seconds)..............300°C
Wiper Current............................................................±1mA




Description

The Intersil X9511 is a push button controlled potentiometer that is ideal for push button controlled resistance trimming. The X9511 is a resistor array composed of 31 resistive elements. Between each element and at either end are tap points accessible to the wiper element. The position of the wiper element is controlled by the PU and PD inputs. The position of the wiper can be automatically stored in E2 memory and then be recalled upon a subsequent power-on operation. The resolution of the X9511 is equal to the maximum resistance value divided by 31. As an example, for the X9511W (10k) each tap point represents 323. All Intersil nonvolatile products are designed and tested for applications requiring extended endurance and data retention.