Position: Home  > All Categories> Integrated Circuits (ICs) > X9279

X9279

Features: • 256 Resistor Taps• 2-Wire Serial Interface for Write, Read, and Transfer Operations of the Potentiometer• Wiper Resistance, 100Ω Typical @ 5V• 16 Nonvolatile Data Registers for Each Potentiometer• Nonvolatile Storage of Multiple Wiper Positions•...

product image

X9279 Picture
See larger image
SeekIC No. : 004547496 Detail

X9279: Features: • 256 Resistor Taps• 2-Wire Serial Interface for Write, Read, and Transfer Operations of the Potentiometer• Wiper Resistance, 100Ω Typical @ 5V• 16 Nonvolatil...

X9279 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
X9279
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/20

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• 256 Resistor Taps
• 2-Wire Serial Interface for Write, Read, and Transfer Operations of the Potentiometer
• Wiper Resistance, 100Ω Typical @ 5V
• 16 Nonvolatile Data Registers for Each Potentiometer
• Nonvolatile Storage of Multiple Wiper Positions
• Power-on Recall. Loads Saved Wiper Position on Power-up.
• Standby Current < 5µA Max
• VCC: 2.7V to 5.5V Operation
• 50kΩ, 100kΩ Versions of End to End Resistance
• Endurance: 100,000 Data Changes per Bit per Register
• 100 yr. Data Retention
• 14 Ld TSSOP
• Low Power CMOS
• Pb-Free Plus Anneal Available (RoHS Compliant)




Application

• Vary the gain of a voltage amplifier
• Provide programmable dc reference voltages for comparators and detectors
• Control the volume in audio circuits
• Trim out the offset voltage error in a voltage amplifier circuit
• Set the output voltage of a voltage regulator
• Trim the resistance in Wheatstone bridge circuits
• Control the gain, characteristic frequency and Q-factor in filter circuits
• Set the scale factor and zero point in sensor signal conditioning circuits
• Vary the frequency and duty cycle of timer ICs
• Vary the dc biasing of a pin diode attenuator in RF circuits
• Provide a control variable (I, V, or R) in feedback circuits
• Adjust the contrast in LCD displays
• Control the power level of LED transmitters in communication systems
• Set and regulate the DC biasing point in an RF power amplifier in wireless systems
• Control the gain in audio and home entertainment systems
• Provide the variable DC bias for tuners in RF wireless systems
• Set the operating points in temperature control systems
• Control the operating point for sensors in industrial systems
• Trim offset and gain errors in artificial intelligent systems




Pinout






Specifications

Temperature under bias ........... -65°C to +135°C
Storage temperature .................-65°C to +150°C
Voltage on SCL, SDA any address input
with respect to VSS ................................-1V to +7V
∆V = | (VH - VL) |..............................................5.5V
Lead temperature (soldering, 10s) ............300°C
IW (10s) .......................................................±6mA




Description

The X9279 integrates a single digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit.

The X9279 digital controlled potentiometer is implemented using 255 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the 2-Wire bus interface. The X9279 potentiometer has associated with it a volatile Wiper Counter Register (WCR) and a four nonvolatile Data Registers that can be directly written to and read by the user. The contents of the WCR controls the position of the wiper on the resistor array though the switches. Powerup recalls the contents of the default data register (DR0) to the WCR.
The XDCP can be used as a three-terminal potentiometer or as a two terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Sensors, Transducers
GP2Y0D340K
PAN3509DH-TXWA
Tapes, Adhesives
803
AC452-2
Prototyping Products
AVT4168
DE1
Relays
WIMA MKP4 0.22UF 630V
WIMA MKP4 4.7UF 630VDC
Motors, Solenoids, Driver Boards/Modules
IHSS57-36-20
ASD-B2-1521-B
Programmers, Development Systems
ARDUINO IIC/I2C 液晶模块
JTAG-SMT2
View more