X9252WV24I-2.7

Resistance (Ohms): 10k
Mounting Type: Surface Mount
Memory Type: Non-Volatile
Voltage - Supply: 2.7 V ~ 5.5 V
Packaging: Tube
Taps: 256
Operating Temperature: -40°C ~ 85°C
Number of Circuits: 4
Package / Case: 24-TSSOP (0.173", 4.40mm Width)
Supplier Device Package: 24-TSSOP
Series: XDCP™
Manufacturer: Intersil
Temperature Coefficient: ±300 ppm/°C Typical
Interface: I²C (Chip Select, Device Address, Up/Down)


Pinout




Description

The X9252WV24I-2.7 is one member of the X9252 family which is designed as the quad digitally-controlled (XDCP) potentiometer that can be used as a three-terminal potentiometer or as a two terminal variable resistor in a wide variety of applications including the programming of bias voltages, the implementation of ladder networks, and three resistor programmable networks. And X9252WV24I-2.7 is implemented using 255 resistive elements in a series array, and has an associated volatile Wiper Counter Register (WCR).

Features of the X9252WV24I-2.7 are:(1)Quad solid state potentiometer; (2)256 Resistor tap points-0.4% resolution; (3)2-wire serial interface for Write, Read, and transfer operations of the potentiometer; (4)Up/Down interface for individual potentiometer wipers; (5)Wiper resistance, 40 typical; (6)Non-volatile storage of wiper positions; (7)Power On Recall Loads saved wiper position on Power Up; (8)Standby Current < 20uA Max; (9)Maximum Wiper Current: 3mA; (10)VCC: 2.7V to 5.5V operation; (11)2.8k, 10k,  50k, 100k version of total pot resistance; (12)Endurance: 100,000 Data changes per bit per register; (13)100 yr. data retention; (14)24-Lead TSSOP.

The absolute maximum ratings of the X9252WV24I-2.7 can be summarized as:(1)Temperature under bias:65°C to +135°C;(2)Storage temperature:65°C to +150°C;(3)Voltage on SCK, SCL or any address input with respect to Vss: -1 V to +7 V;(4)Voltage on V+ (referenced to Vss): +7 V;(5)Voltage on V- (referenced to Vss): -7 V;(6)(V+) - (V-): 10 V;(7)Lead temperature (soldering, 10 seconds): 300°C.

The electrical characteristics of X9252WV24I-2.7 can be summarized as:(1)Wiper current:3 to +3 mA;(2)Input Offset Voltage: 1 to 2 mV;(3)Input Offset Voltage Temperature Coefficient: -10 V/°C;(4)Input bias current: 50 pA;(5)Input offset current: 25 pA;(6)Common mode rejection ratio: 70 dB;(7)Power supply rejection ratio: 70 dB;(8)Large signal voltage gain: 30 to 50 V/mV;(9)Gain-bandwidth prod: 1.0 MHz;(10)Slew rate: 1.5 V/sec. If you want to know more information such as the electrical characteristics about X9252WV24I-2.7, please download the datasheet in www.seekic.com or www.chinaicmart.com.

Parameters:

Technical/Catalog Information	X9252WV24I-2.7
Vendor	Intersil
Category	Integrated Circuits (ICs)
Number of Circuits	4 - Quad
Resistance In Ohms	10K
Interface	I²C, 2-Wire Serial
Taps	256
Package / Case	24-TSSOP
Packaging	Tube
Voltage - Supply	2.7 V ~ 5.5 V
Memory Type	Non-Volatile
Temperature Coefficient	300 ppm/°C Typical
Operating Temperature	-40°C ~ 85°C
Drawing Number	*
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	X9252WV24I 2 7 X9252WV24I27