X25010

The X25010 is designed as a CMOS 1024 bit serial internally organized as 128x8.The X25010 features a serial interface and software protocol allowing operation on a simple three wire bus.The bus signals are a clock input(SCK) plus separate data in and data out lines.Access to the device is controlled through a chip select input,allowing any number of devices to share the same bus.The X25010 also features two additional inputs that provide the end user with added flexibility.By asserting the HOLD input,the X25010 will ignore transitions on its inouts,thus allowing the host to service higher priority interrupts. The WP input can be used as a hardwire input to the X25010 disabling all write attempts;thus providing a mechanism for limiting end user capability of altering the memory.

Features of the X25010 can be summarized as:(1)1 MHz clock rate;(2)128x8 bits-4 byte page mode;(3)low power CMOS;(4)3V to 5.5V power supply;(5)bolck write protection-protect 1/4,1/2 or all of EPROM array;(6)8-pin mini-dip package;(9)8-pin SOIC package.

The absolute maximum ratings of X25010 are:(1)temperature under bias:-65 to +135;(2)storagr temperature:-65 to +150;(3)voltage on any pin with respect to ground:-1.0V to +7V;(4)D.C. output current:5 mA;(5)lead temperature(soldering,10 seconds):300.If you want to know more information,please download the datasheet in www.seekic.com and www.chinaicmart.com .