WP1602BYJCS

      This is the description about WP1602BYJCS . The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an instruction register (IR) and a data register (DR). The IR stores instruction codes, such as display clear and cursor shift, and address information for display data RAM (DDRAM) and character generator (CGRAM). The IR can only be written from the MPU. The DR temporarily stores data to be written or read from DDRAM or CGRAM. When address information is written into the IR, then data is stored into the DR from DDRAM or CGRAM. By the register selector (RS) signal, these two registers can be selected.
      Here are the Electrical Characteristics of the WP1602BYJCS. Supply Voltage for Logic is from 4.5 to 5.5V. Supply Voltage for LCD is from 2.0 to 5.0V. Input High Volt is from 0.7 VDD to VDD V. Input Low Volt is from -0.3 to 0.55V. Output High Volt is 2.4V. Output Low Volt is 0.4V. Supply Current is 0.6mA.
      The absolute Maximum Ratings of the WP1602BYJCS are these (TA = 25). Operating Temperature is from -20 to +50. Storage Temperature is from -30 to +70. Input Voltage is from -0.3 to VDDV. Supply Voltage for Logic is from -0.3 to 7V. Supply Voltage For LCD is from -0.3 to 5.0V.
      At present there is not too much information about this model. If you are willing to find more about the WP1602BYJCS , please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.