Features: • AC'97 Rev 2.2 compatible stereo codec- DAC SNR 94dB, THD 87dB- ADC SNR 92dB, THD 87dB- Variable Rate Audio, supports all WinCE sample rates- Tone Control, Bass Boost and 3D Enhancement
• On-chip 45mW headphone driver
• On-chip 400mW mono speaker driver
• Stereo, mono or differential microphone input- Automatic Level Control (ALC)
• Auxiliary mono DAC (ring tone or DC level generation)
• Seamless interface to wireless chipset
• Up to 5 GPIO pins
• 2 comparator inputs for battery monitoring
• 1.8V to 3.6V supplies
• 7x7mm QFN or 48-pin TQFP package optionsApplication• Personal Digital Assistants (PDA)
• Smartphones
• Handheld and Tablet ComputersPinout
Specifications
| CONDITION |
MIN |
MAX |
| Digital supply voltages (DCVDD, DBVDD) |
-0.3V |
+3.63V |
| Analogue supply voltages (AVDD, HPVDD, SPKVDD) |
-0.3V |
+3.63V |
| Voltage range digital inputs |
DGND -0.3V |
DBVDD +0.3V |
| Voltage range analogue inputs |
AGND -0.3V |
AVDD +0.3V |
| Voltage range, COMP3 (pin31) |
|
+5V |
| Operating temperature range, TA |
-25oC |
+85oC |
| Storage temperature (TQFP package only) |
-65oC |
+150oC |
DescriptionThe WM9711L is a highly integrated input / output device designed for mobile computing and communications. The device can connect directly to mono or stereo microphones,stereo headphones and a mono speaker, reducing total component count in the system. Additionally, phone input and output pins are provided for seamless integration with wireless communication devices.
The WM9711L also offers five GPIO pins for interfacing to buttons or other digital devices. To monitor the battery voltage in portable systems, the WM9711L has two uncommitted comparator inputs.
All device functions of the WM9711L are accessed and controlled through a single AC-Link interface compliant with the AC'97 standard.Additionally, the WM9711L can generate interrupts to indicate low battery, dead battery, thermal cut-out and GPIO conditions.
The WM9711L operates at supply voltages from 1.8 to 3.6 Volts. Each section of the chip can be powered down under software control to save power. The device is available in a small leadless 7x7mm QFN package, ideal for use in handheld portable systems, or in the industry standard 48-pin TQFP package.
WM9711L Data Sheet
