IC MONITOR H/W 48-LQFP
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Supply Voltage - Max : | 3.63 V | ||
Manufacturer: | Nuvoton Technology Corporation of America | Function: | Hardware Monitor | ||
Sensor Type: | External | Sensing Temperature: | External Sensor | ||
Accuracy: | ±3°C(Max) | Topology: | ADC, Fan Speed Counter, Register Bank | ||
Output Type: | I²C?, ISA | Output Alarm: | No | ||
Output Fan: | Yes | Voltage - Supply: | 4.5 V ~ 5.5 V | ||
Operating Temperature: | 0°C ~ 70°C | Mounting Type: | Surface Mount | ||
Package / Case: | 48-LQFP | Supplier Device Package: | 48-QFP (7x7) |
Monitoring Items
• 3 thermal inputs from remote thermistors or 2N3904 NPN-type transistors or PentiumTM II (Deschutes) thermal diode output
• 9 voltage inputs
− Typical for Vcore, +3.3V, +12V, -12V, +5V, -5V, +5V Vsb, Vbat, and one reserved
• 3 fan speed monitoring inputs
• Case open detection input
• WATCHDOG comparison of all monitored values
• Programmable hysteresis and setting points (alarm thresholds) for all monitored items
PARAMETER | RATING | UNIT |
Power Supply Voltage | -0.5 to 7.0 | V |
Input Voltage | -0.5 to VDD+0.5 | V |
Operating Temperature | 0 to +70 | |
Storage Temperature | -55 to +150 |
Note: Exposure to conditions beyond those listed under Absolute Maximum Ratings may adversely affect the life and reliability of the device.
W83782D/G is an evolving version of W83781D/G -- Winbond's most popular hardware status monitoring IC. The W83782D/G can be used to monitor several critical hardware parameters of the system, including power supply voltages, fan speeds, and temperatures, which are very important for a high-end computer system to work stable and properly. W83782D/G provides both ISA and I2CTM serial bus interface.
An 8-bit analog-to-digital converter (ADC) was built inside W83782D/G. The W83782D/G can simultaneously monitor 9 analog voltage inputs, 2 fan tachometer inputs, 3 remote temperature, one case-open detection signal. The remote temperature sensing can be performed by thermistors, or 2N3904 NPN-type transistors, or directly from IntelTM Deschutes CPU thermal diode output. Also the W83782D/G provides 4 PWM (pulse width modulation) outputs for the fan speed control; beep tone output for warning; SMI#, OVT#, GPO# signals for system protection events.
Through the application software or BIOS, the users can read all the monitored parameters of system from time to time. And a pop-up warning can be also activated when the monitored item was out of the proper/preset range. The application software could be Winbond's Hardware DoctorTM, or IntelTM LDCM (LanDesk Client Management), or other management application software. Also the users can set up the upper and lower limits (alarm thresholds) of these monitored parameters and to activate one programmable and maskable interrupts. An optional beep tone could be used as warning signal when the monitored parameters are out of the preset range.
Additionally, 5 VID inputs are provided to read the VID of CPU (i.e. PentiumTM II) if applicable. This is to provide the Vcore voltage correction automatically. Also W83782D/G uniquely provides an optional feature: early stage (before BIOS was loaded) beep warning. This is to detect if the fatal elements present --- Vcore or +3.3V voltage fail, and the system can not be boomed up. Also there are 3 specific pins to provide selectable address setting for application of multiple devices (up to 8 devices) wired through I2CTM interface.
Technical/Catalog Information | W83782G |
Vendor | Nuvoton Technology Corporation of America |
Category | Integrated Circuits (ICs) |
Voltage - Supply | 5V |
Package / Case | 48-LQFP |
Packaging | Tray |
Output Type | * |
Sensing Temperature | * |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | W83782G W83782G |