Features: · Supports PentiumÔ, PentiumÔ Pro, PentiumÔ II, AMD and Cyrix CPUs with I2C.· 4 CPU clocks· 12 SDRAM clocks for 3 DIMs· Two AGP clocks· 6 PCI synchronous clocks.· Optional single or mixed supply: (VDD = VDDq3 = VDDq2 = VDDq2b = 3.3V) or (VDD = VDDq3 = VDDq2 = 3.3V, VDDq...
W83194R-37: Features: · Supports PentiumÔ, PentiumÔ Pro, PentiumÔ II, AMD and Cyrix CPUs with I2C.· 4 CPU clocks· 12 SDRAM clocks for 3 DIMs· Two AGP clocks· 6 PCI synchronous clocks.· Optiona...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | SYMBOL | RATING |
Voltage on any pin with respect to GND | VDD, VIN | -0.5V to +7.0V |
Storage Temperature | TSTG | -65° C to +150° C |
Ambient Temperature | TB | -55° C to +125° C |
Operating Temperature | TA | 0° C to +70° C |
The W83194R-37/-58 is a Clock Synthesizer for VIA chipset. W83194R-37 provides all clocks required for high-speed RISC or CISC microprocessor such as Intel PentiumPro, AMD or Cyrix. Eight different frequencies of CPU, W83194R-58 provides all clocks required for high-speed RISC or CISC microprocessor such as Intel PentiumII and also provides 16 different frequencies of CPU clocks by software setting (additional register0 bit2). AGP and PCI clocks are externally selectable with smooth transitions. The W83194R-37/-58 provides AGP clocks especially for clone chipset, and makes SDRAM in synchronous frequency with CPU or AGP clocks.
The W83194R-37/-58 provides I2C serial bus interface to program the registers to enable or disable each clock outputs and choose the 0.25%, 0.5% or 0.5%,1.5% center type spread spectrum to reduce EMI.
The W83194R-37/-58 accepts a 14.318 MHz reference crystal as its input and runs on a 3.3V supply. High drive PCI and SDRAM CLOCK outputs typically provide greater than 1V /nS slew rate into 30 pF loads. CPU CLOCK outputs typically provide better than 1V /nS slew rate into 20 pF loads as maintaining 50 ±5% duty cycle. The fixed frequency outputs as REF, 24 MHz, and 48 MHz provide better than 0.5V /nS slew rate.