Features: • 1 3.3V open drain Differential pairs clock outputs for CPU• 1 3.3V open drain singled-ended clock output for chipset host bus.• 1 pair 3.3V current mode differential SRC clock.• 2 3.3V ZCLK clock outputs• 2 AGP clock outputs• 8 PCI synchronous clocks...
W83194BR-703: Features: • 1 3.3V open drain Differential pairs clock outputs for CPU• 1 3.3V open drain singled-ended clock output for chipset host bus.• 1 pair 3.3V current mode differential SR...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Winbond customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Winbond for any damages resulting from such improper use or sales.
Stresses greater than those listed in this table may cause permanent damage to the device. Precautions should be taken to avoid application of any voltage higher than the maximum rated voltages to this circuit. Subjection to maximum conditions for extended periods may affect reliability. Unused inputs must always be tied to an appropriate logic voltage level (Ground or VDD).
PARAMETER | RATING |
Absolute 3.3V Core Supply Voltage | -0.5V to +4.6V |
Absolute 3.3V I/O Supple Voltage | - 0.5 V to + 4.6 V |
Operating 3.3V Core Supply Voltage | 3.135V to 3.465V |
Operating 3.3V I/O Supple Voltage | 3.135V to 3.465V |
Storage Temperature | - 65 to + 150 |
Ambient Temperature | - 55 to + 125 |
Operating Temperature | 0 to + 70 |
Input ESD protection (Human body model) | 2000V |
The W83194BR-703 is a Clock Synthesizer for SIS 741 chipset with 964 South Bridge. W83194BR- 703 provides all clocks required for high-speed microprocessor and provides step-less frequency programming and 32 different frequencies of CPU, PCI, and AGP clocks setting, support two ZCLK clock and one pair current mode differential SRC clock outputs; all clocks are externally selectable with smooth transitions.
The W83194BR-703 provides I2C serial bus interface to program the registers to enable or disable each clock outputs and provides -0.5% and +/-0.25% center type spread spectrum or programmable S.S.T. scale to reduce EMI.
The W83194BR-703 also has watchdog timer to support auto-reset when systems hanging caused by improper frequency setting.
The W83194BR-703 accepts a 14.318 MHz reference crystal as its input and runs on a 3.3V supply.