Features: • Single +5V power supply• Typical power dissipation of 25 mW, power-down mode of 0.5 W• Fully-differential analog circuit design• On-chip precision reference of 1.575 V for a 0 dBm TLP at 600 • Push-pull power amplifiers with external gain adjustment with 3...
W681511: Features: • Single +5V power supply• Typical power dissipation of 25 mW, power-down mode of 0.5 W• Fully-differential analog circuit design• On-chip precision reference of 1....
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Condition |
Value |
Junction temperature | 150°C |
Storage temperature range | -65°C to +150°C |
Voltage Applied to any pin | (VSS - 0.3V) to (VDD + 0.3V) |
Voltage applied to any pin (Input current limited to +/-20 mA) |
(VSS 1.0V) to (VDD + 1.0V) |
Lead temperature (soldering 10 seconds) | 300°C |
VDD - VSS | -0.5V to +6V |
The W681511 is a general-purpose single channel PCM CODEC with pin-selectable -Law or A-Law companding. The device is compliant with the ITU G.712 specification. It operates off of a single +5V power supply and is available in 20-pin PDIP, SOG, SSOP, and TSSOP package options. Functions performed include digitization and reconstruction of voice signals, and band limiting and smoothing filters required for PCM systems. The filters are compliant with ITU G.712 specification. W681511 performance is specified over the industrial temperature range of 40°C to +85°C.
The W681511 includes an on-chip precision voltage reference and an additional power amplifier, capable of driving 300 loads differentially up to a level of 6.3V peak-to-peak. The analog section is fully differential, reducing noise and improving the power supply rejection ratio. The data transfer protocol supports both long-frame and short-frame synchronous communications for PCM applications, and IDL and GCI communications for ISDN applications. W681511 accepts sevenmaster clock rates between 256 kHz and 4.096 MHz, and an on-chip pre-scaler automaticallydetermines the division ratio for the required internal clock.