VWRAS3-SIP

- All of the VWRAS3-SIP Series have been tested according to the following recommended testing circuit before leaving the factory. This series should be tested under load(Figure 1). If you want to further decrease the input/output ripple, you can increase capacitance properly or choose capacitors with low ESR. However, the capacitance should not be too high(Table 2).

- NC Terminals
Unless otherwise specified, NC terminals of all series are used for converter's interior circuit connection, and are not allowed connection of any external circuit.;

- CTRL Terminal
When open or high impedance, the converter will work well; When this pin is 'high'; the converter will shutdown; It should be noted that the input current should remain between 5-10mA,exceeding the maximum 20mA will cause permanent damage to the converter.


- Input current
Nominal input voltage range. The input current of the power supply must be sufficient to the startup current (Ip) of the DC/DC module (Figure 2)

Output short circuit protection.......... Continuous
Temperature rise at full load .......15typ., 35 max.
Cooling.................. Free air convection
Operating temperature range ........ -40 to +85
Storage temperature range ........ -50 to +125
Soldering temperature..300 (1.5mm from case for 10sec.)
Storage humidity range ................ <95%
Case material................Plastic (UL94-V0)
MTBF..................... >1,000,000 hrs.
Weight .......................... 6 g

Designed to convert a wide input voltage range into an isolated regulated voltage, the VWRAS3-SIP series is well suited for providing board-mount local supplies in a wide range of applications, including mixed analog/digital circuits, test & measurement equip., process/machine controls, datacom/telecom fields, etc...