VO4661

Current Transfer Ratio :
Maximum Input Diode Current :
Maximum Reverse Diode Voltage : 5 V
Maximum Operating Temperature : + 100 C
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Forward Diode Voltage : 1.7 V
Maximum Baud Rate : 10 MBps
Maximum Power Dissipation : 60 mW
Package / Case : PDIP-8


Description

High Speed Optocoupler, 10 MBd

The VO4661 has the following features including Choice of CMR performance of 10 kV/s,5 kV/s, and 100 V/s;High speed: 10 Mbd typical;+ 5 V CMOS compatibility;Guaranteed AC and DC performance over temperature:- 40 to + 100 °C Temp. Range;Pure tin leads;Meets IEC60068-2-42 (SO2) and IEC60068-2-43 (H2S) requirements;Low input current capability: 5 mA;Lead (Pb)-free component;Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC.
The VO4661 are dual channel 10MBd optocouplers. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/s for the VO2601 and VO2631 and 10 kV/s for the VO2611 and VO4661. The use of a 0.1 F bypass capacitor connected between pin 5 and 8 is recommended.
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.Minimum and maximum values are testing requirements. Typical values are characteristics of the VO4661 device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. VO4661 is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives of VO4661 are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.
Information of VO4661 contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.