VO2630

Current Transfer Ratio :
Maximum Input Diode Current :
Maximum Reverse Diode Voltage : 5 V
Maximum Operating Temperature : + 100 C
Minimum Operating Temperature : - 40 C
Packaging : Tube
Maximum Forward Diode Voltage : 1.7 V
Maximum Baud Rate : 10 MBps
Maximum Power Dissipation : 60 mW
Package / Case : PDIP-8


Features:

• Choice of CMR performance of 10 kV/µs, 5 kV/µs, and 100 V/µs
• High speed: 10 Mbd typical
• + 5 V CMOS compatibility
• Guaranteed AC and DC performance over temperature:
- 40 to + 100 °C Temp. Range
• Pure tin leads
• Meets IEC60068-2-42 (SO2) and IEC60068-2-43 (H2S) requirements
• Low input current capability: 5 mA
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC e3




Application

Microprocessor System Interface
PLC, ATE input/output isolation
Computer peripheral interface
Digital Fieldbus Isolation: CC-Link, DeviceNet,
Profibus, SDS
High speed A/D and D/A conversion
AC Plasma Display Panel Level Shifting
Multiplexed Data Transmission
Digital control power supply
Ground loop elimination




Specifications

Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.

Symbol	PARAMETER	CONDITIONS	Unit	Value
IF	Average forward current1)		mA	20
IF	Average forward current2)		mA	15
VR	Reverse input voltage		V	5
VE	Enable input voltage1)		V	VCC + 0.5 V
IE	Enable input current1)		mA	2
IFSM	Surge current	t = 100 µs	mA	200
Output
VCC	Supply voltage	1 minute max.	V	7
IO	Output current		mA	50
VO	Output voltage		V	7
PO	Output power dissipation1)		mW	85
PO	Output power dissipation2)		mW	60

Description

High Speed Optocoupler, 10 MBd

The 6N137, VO2601 and VO2611 are single channel 10 Mbd optocouplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to anopen collector Schottky clamped transistor output. The VO2630, VO2631 and VO4661 are dual channel 10MBd optocouplers. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/µs for the 6N137, VO2601 and VO2611  and 10 kV/µs. The use of a 0.1 µF bypass capacitor connected between pin 5 and 8 is recommended.