VO0600T

Current Transfer Ratio :
Maximum Input Diode Current :
Maximum Reverse Diode Voltage : 5 V
Maximum Operating Temperature : + 100 C
Minimum Operating Temperature : - 40 C
Package / Case : SOIC-8
Maximum Forward Diode Voltage : 1.7 V
Packaging : Reel
Maximum Baud Rate : 10 MBps
Maximum Power Dissipation : 85 mW


Features:

• Choice of CMR performance of 15 kV/s, 5 kV/s, and 100 V/s
• High speed: 10 MBd typical
• + 5 V CMOS compatibility
• Pure tin leads
• Guaranteed AC and DC performance over temperature: - 40 °C to + 100 °C temp. range
• Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements
• Low input current capability: 5 mA
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC




Application

• Microprocessor systemM interface
• PLC, ATE input/output isolation
• Computer peripheral interface: SPI
• Digital fieldbus isolation: CC-Link, DeviceNet, profibus, SDS
• High speed A/D and D/A conversion
• AC plasma display panel level shifting
• Multiplexed data transmission
• Digital control power supply
• Ground loop elimination




Specifications

PARAMETER	TEST CONDITION	SYMBOL	VALUE	UNIT
INPUT
Average forward current (single channel)		IF	20	mA
Average forward current (dual channel)		IF	15	mA
Reverse input voltage		VR	5	V
Enable input voltage (single channel)		VE	VCC + 0.5 V	V
Enable input current (single channel)		IE	5	mA
Surge current	t = 100 s	IFSM	200	mA
Output power dissipation (single channel)		Pdiss	35	mW
Output power dissipation (per channel for dual channel)		Pdiss	25	mW
OUTPUT
Supply voltage	1 min maximum	VCC	7	V
Output current		IO	50	mA
Output voltage		VO	7	V
Output power dissipation (single channel)		Pdiss	85	mW
Output power dissipation (per channel for dual channel)		Pdiss	60	mW
COUPLER
Isolation test voltage	t = 1.0 s	VISO	4000	VRMS
Storage temperature		Tstg	- 55 to + 150	°C
Operating temperature		Tamb	- 40 to + 100	°C
Lead solder temperature	for 10 s		260	°C
Solder reflow temperature (2)	for 1 min		260	°C

Notes
(1) Tamb = 25 °C, unless otherwise specified.
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability.
(2) Refer to reflow profile for soldering conditions for surface mounted devices.

Description

The VO06xxT family are single and dual channel 10 MBd optocoupler utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The VO06xxT detector has an open drain NMOS-transister output, providing less leakage compared to an open collector Schottky clamped transister output. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/s for the VO0601T and VO0631T and 15 kV/s for the VO0611T and VO0661T. The use of a 0.1 F bypass capacitor connected between pin 5 and 8 is recommended.  High Speed Optocoupler, 10 MBd, SOIC-8 Package