Specifications Symbol Parameter Value Unit VCC Supply voltage -0.3.. 40 V Imax1 Maximum output current (continuous) 30 A IR Reverse output current (continuous) -30 A IIN Input current (INA and INB pins) +/- 10 mA IEN Enable input current (DIA...
VNH3SP30: Specifications Symbol Parameter Value Unit VCC Supply voltage -0.3.. 40 V Imax1 Maximum output current (continuous) 30 A IR Reverse output current (continuous) -30 ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $2.56 - 3.5 / Piece
Motor / Motion / Ignition Controllers & Drivers Auto fully integratd H bridge motor drivr
US $2.57 - 3.08 / Piece
Motor / Motion / Ignition Controllers & Drivers Auto fully integratd H bridge motor drivr
Symbol | Parameter | Value | Unit | |
VCC |
Supply voltage |
-0.3.. 40 | V | |
Imax1 |
Maximum output current (continuous) |
30 | A | |
IR |
Reverse output current (continuous) |
-30 | A | |
IIN |
Input current (INA and INB pins) |
+/- 10 |
mA | |
IEN |
Enable input current (DIAGA/ENA and DIAGB/ENB pins) |
+/- 10 | mA | |
Ipw |
PWM input current |
+/- 10 |
mA | |
VESD |
Electrostatic discharge (R=1.5k, C=100pF) - Logic pins - Output pins: OUTA, OUTB, VCC |
4 |
KV | |
Tj |
Junction operating temperature |
Internally Limited | ||
TC |
Case operating temperature |
-40 to 150 | ||
TSTG |
Storage Temperature |
-55 to 150 |
|
The VNH3SP30 is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic HSD and two Low-Side switches. The HSD switch is designed using STMicroelectronics VIPower M0-3 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry. The Low-Side switches are vertical MOSFETs manufactured using STMicroelectronics proprietary EHD ("STripFET™") process.