VNB49N04

On Time (Max) :
Off Time (Max) :
Maximum Operating Temperature :
Mounting Style : SMD/SMT
Number of Outputs : 1
Package / Case : D2PAK
Operating Supply Voltage : 18 V
Supply Current (Max) : 0.25 mA
On Resistance (Max) : 40 mOhms


Features:

During normal operation, the INPUT pin is electrically connected to the gate of the internal power MOSFET. The device then behaves like a standard power MOSFET and can be used as a switch from DC up to 50KHz. The only difference from the user's standpoint is that a small DC current (I_ISS) flows into the INPUT pin in order to supply the internal circuitry.

The device integrates:
- OVERVOLTAGE CLAMP PROTECTION:internally set at 42V, along with the rugged avalanche characteristics of the Power MOSFET stage give this device unrivalled ruggedness and energy handling capability. This feature is mainly important when driving inductive loads.

- LINEAR CURRENT LIMITER CIRCUIT:limits the drain current ID to ILIM whatever the INPUT pin voltage. When the current limiter is active, the device operates in the linear region, so power dissipation may exceed the capability of the heatsink. Both case and junction temperatures increase, and if this phase lasts long enough,junction temperature may reach the overtemperature threshold T_jsh.

- OVERTEMPERATURE AND SHORT CIRCUIT PROTECTION:these are based on sensing the chip temperature and are not dependent on the input voltage. The location of the sensing element on the chip in the power stage area ensures fast, accurate detection of the junction temperature. Overtemperature cutout occurs at minimum 150°C. The device is automatically restarted when the chip temperature falls below 135°C.

- STATUS FEEDBACK:in the case of an overtemperature fault condition, a status feedback is provided through the INPUT pin. The internal protection circuit disconnects the input from the gate and connects it instead to ground via an equivalent resistance of 100W. The failure can be detected by monitoring the voltage at the INPUT pin, which will be close to ground potential. Additional features of this device are ESD protection according to the Human Body model and the ability to be driven from a TTL Logic circuit (with a small increase in R_DS(ON))_.

Specifications

Symbol		Parameter	Value			Unit
			PowerSO-10TM	D2PAK	ISOWATT220
VDS		Drain-source Voltage (Vin = 0)	Internally Clamped			V
VIN		Input Voltage	18			V
ID		Drain Current	Internally Limited			A
IR		Reverse DC Output Current	-50			A
Vesd		Electrostatic discharge(C= 100 pF, R=1.5 K)	2000			V
Ptot		Total Dissipation at TC=25°C	125	125	40	W
Tj		Operating Junction Temperature	Internally Limited
TC		Case operating temperature	Internally Limited
Tstg		Storage Temperature	-55 to 150

Description

The VNP49N04FI, VNB49N04, VNV49N04 are monolithic devices designed in STMicroelectronics VIPower M0 Technology,intended for replacement of standard Power MOSFETS from DC up to 50KHz applications.Built-in thermal shutdown, linear current limitation and overvoltage clamp protect the chip in harsh environments.Fault feedback can be detected by monitoring the voltage at the input pin.

Parameters:

Technical/Catalog Information	VNB49N04
Vendor	STMicroelectronics
Category	Integrated Circuits (ICs)
Package / Case	D²Pak, SMD-220, TO-263 (2 leads + tab)
Mounting Type	Surface Mount
Type	Low Side
Voltage - Supply	-
On-State Resistance	40 mOhm
Current - Output / Channel	-
Current - Peak Output	49A
Packaging	Tube
Input Type	Non-Inverting
Number of Outputs	1
Operating Temperature	-
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	VNB49N04 VNB49N04