VN710SP

The VN710SP is a monolithic device made using STMicroelectronics VIPower M0-3 technology,intended for driving any kind of load with one side connected to ground. Active V_CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transients compatibility table). Active current limitation combined with thermal shutdown protect the device against overload. After a thermal shutdown event, device stays latched off and diagnostic stays at a low level until next falling edge of input signal. The device VN710SP detects open load condition both in on state and off state. Output shorted to V_CC is detected in the off state. Device automatically turns off in case of ground pin disconnection.Enable pin allows to switch the device to idle state with very low quiescent current from V_CC. When enable is low, device turns off regardless of input pin state.