Features: SpecificationsDescription VFC52 is hybird microcircuits wich can be connected as voltage-to-frenquency or frequency-to-voltage converters. VFC52provide a aimple, low coat method of converting analog aignals into an equivalent digital form. The digital output is an open collector which ca...
VFC52: Features: SpecificationsDescription VFC52 is hybird microcircuits wich can be connected as voltage-to-frenquency or frequency-to-voltage converters. VFC52provide a aimple, low coat method of convert...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
VFC52 is hybird microcircuits wich can be connected as voltage-to-frenquency or frequency-to-voltage converters. VFC52provide a aimple, low coat method of converting analog aignals into an equivalent digital form. The digital output is an open collector which can be made compatible with DTL,TTL, or CMOS logic. The output is a train of constant-ampitude , constant-width pulses whose repetition rate is proportional to the amplitude of the analog input voltage. In the frenquency-to-voltage mode the pulses become the input and the proportional DC voltage , the output. VFC52 is offered in epoxy(-25 to +85) and hermetic metal(-25 to +85 and -55 to +125 ) 14-pin DIP packages.
VFC52 has six unique features which is as follows : The first one is V/F or F/V conversion. The second one is two frequency range which is 10 KHz. The third one is low nomlinearity which is ±0.01% max.The forth one is minimal external components required (add only one external resistor for V/F operation). The fifth one is 0 decade dynamic range. The sixth one is output OTL/TTL/CMOS compatible.
There are some specifications about VFC52. Full scale frequency is 10 KHz typ. Analog input(V/F) is 0 V min and 10 V max. Voltage range is 0 V min and +0.25 V max. Input blas current (pin14) inverting input is 6 nA typ and 8 nA max. Input offset voltage(trimmable to zero) is 100 A typ and 200A max. Input impedance(pin1) is 32 K min , 40 K typ and 45 K max. Voltage output range is 0 V to + 10 V when the Io is or below 5 mA.ouput current is +10 mA min when the Vo is or below 7V. Output impedance(closed loop) is 1 max. Capacitive load is 100 PFmax. Power supply requirements: Rated supplies are ±15 V typ. Supply range is ±9 V min and ±20 V max. Supply drain (independent of operating frequency) is ±6.5 mA typ and ±7.5 mA max.
Well , you may want to know more about VFC52 , right ? If you are interested in it and want to know more detailed information about it , please pay more attention to our web and our information ! Thanks for being concern of our information !