V375A48C600B

Type: Isolated
Number of Outputs: 1
Voltage - Output 2: -
Voltage - Output 3: -
Mounting Type: Through Hole
Packaging: Bulk
Voltage - Isolation: *
Features: *
Voltage - Output 1: 48V
Power (Watts) - Manufacture Series: 600W
Package / Case: Module
Efficiency: *
Manufacturer: Vicor Corporation
Voltage - Input (Min): 250V
Operating Temperature: -20°C ~ 100°C
Current - Output (Max): *
Voltage - Input (Max): 425V
Series: Maxi
Size / Dimension: 4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)


Features:

• DC input range: 250 - 425V
• Input surge withstand:  500V for 100ms
• DC output: 48V
• Programmable output: 10 to 110%
• Regulation: ±0.25% no load to full load
• Efficiency: 88.5%
• Maximum operating temperature:  100°C at full load
• Power density: 118W/cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture


Application

distributed power;
off-line systems using power PFC front-ends;
electric vehicles


Specifications

Parameter	Rating	Unit	Notes
+In to In voltage	-0.5 to +425	Vdc
+In to In voltage	500	Vdc	<100ms
PC to In voltage	-0.5 to +7.0	Vdc
PR to In voltage	-0.5 to +7.0	Vdc
+Out to Out voltage	0.5 to +62.9	Vdc
+Sense to Out voltage	-0.5 to +1.5	Vdc
Sense to Out voltage	1.0	Vdc
SC to Out voltage	-0.5 to +1.5	Vdc
Isolation voltage (in to out)	3000	Vrms
Isolation voltage (in to base)	1550	Vrms
Isolation voltage (out to base)	500	Vrms
Storage temperature (CGrade)	-40 to +125	°C	See part numbering chart on this page for other product grades.
Operating temperature (CGrade)	-20 to +100	°C	Baseplate
Pin soldering temperature	500 (260)	°F (°C)	<5 sec; wave solder
Pin soldering temperature	750 (390)	°F (°C)	<7 sec; hand solder
Mounting torque	5 (0.57)	in-lbs (N-m)	6 each, # 4-40 or M3

Description

The V375A48C600B uses 2nd Generation power processing, control and packaging technologies to provide the performance, flexibility and cost effectiveness expected of a mature power component.

For example, V375A48C600B, a plated-cavity core transformer couples widely separated primary and secondary windings, resulting in low in-to-out parasitic capacitance and noise.

High frequency ZCS/ZVS switching, V375A48C600B, advanced power semiconductor packaging and thermal management provide high power density with low temperature gradients. Extensive use of silicon integration results in 1/3 the part count  of a 1st Generation converter.