V375A3V3C264B

Type: Isolated
Number of Outputs: 1
Voltage - Output 2: -
Voltage - Output 3: -
Voltage - Output 1: 3.3V
Mounting Type: Through Hole
Packaging: Bulk
Voltage - Isolation: *
Features: *
Package / Case: Module
Efficiency: *
Manufacturer: Vicor Corporation
Voltage - Input (Min): 250V
Operating Temperature: -20°C ~ 100°C
Current - Output (Max): *
Voltage - Input (Max): 425V
Series: Maxi
Power (Watts) - Manufacture Series: 264W
Size / Dimension: 4.60" L x 2.20" W x 0.54" H (116.8mm x 55.9mm x 13.7mm)


Features:

• DC input range: 250 - 425V
• Input surge withstand: 500V for 100ms
• DC output: 3.3V
• Programmable output: 10 to 110%
• Regulation: ±0.2% no load to full load
• Efficiency: 81.5%
• Maximum operating temperature:100°C at full load
• Power density: 52W/cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture


Specifications

Parameter	Rating	Unit	Notes
+In to In voltage	-0.5 to +425	Vdc
+In to In voltage	400	Vdc	<100ms
PC to In voltage	-0.5 to +7.0	Vdc
PR to In voltage	-0.5 to +7.0	Vdc
+Out to Out voltage	-0.5 to +4.79	Vdc
+Sense to Out voltage	-0.5 to +4.79	Vdc
Sense to Out voltage	1.0	Vdc
SC to Out voltage	-0.5 to +1.5	Vdc
Isolation voltage (in to out)	3000	Vrms
Isolation voltage (in to base)	1550	Vrms
solation voltage (out to base)	500	Vrms
Storage temperature (CGrade)	-40 to +125	°C	See part numbering chart on this page for other product grades.
Operating temperature (CGrade)	-20 to +100	°C	Baseplate
Pin soldering temperature	500 (260)	°F (°C)	<5 sec; wave solder
Pin soldering temperature	750 (390)	°F (°C)	<7 sec; hand solder
Mounting torque	5 (0.57)	in-lbs (N-m)	6 each, # 4-40 or M3