Features: * Compliant with ATM, SONET OC-3, SDH STM-1 and SONET OC-12, SDH STM-4
* Meets mezzanine standard height of 9.8 mm
* Compact integrated transceiver unit with MQW laser diode transmitter InGaAs PIN photodiode receiver Duplex SC receptacle
* Class 1 FDA and IEC laser safety compliant
* FDA Accession No. 9520890-12, 9520890-13
* Single power supply (3.3 V)
* Signal detect indicator
* PECL differential inputs and outputs
* Process plug included
* Input Signal Monitor
* Wave solderable and washable with process plug inserted
* Industry standard multisource 1x9 footprint
* For distances of up to 15 km on single mode fiberSpecifications
| Parameter |
Symbol |
Limit Values |
UNIT |
| min. |
max |
Package Power Dissipation |
|
|
0.9 |
W |
| Supply Voltage 3.3 V |
V CC VEE
|
|
5 |
V |
| Data Input Levels |
|
|
V CC+ 0.5
|
| Differential Data Input Voltage |
|
|
2.5 |
| Operating Ambient Temperature |
|
40 |
85 |
|
| Storage Ambient Temperature |
|
40 |
85 |
Soldering Conditions Temp/Time
(MIL-STD 883C, Method 2003) |
|
|
250/5.5 |
°C/s |
,
DescriptionThe V23826-H18-C366 complies with the ATM Forum's Network Compatible ATM for Local Network Applications document and ANSI's Broadband ISDN - Customer Installation Interfaces, Physical Media Dependent Specification, T1.646-1995, Bellcore - SONET OC-3 / IR-1 and OC-12 / IR-1, ITU-T G.957 STM-1 / S.1.1. and STM-4 / S.4.1. ATM was developed to facilitate solutions in multimedia applications and real time transmission. The data rate is scalable, and the V23826-H18-C366 is the basis of the broadband public networks being standardized in the International Telecommunications Union (ITU), the former International Telegraph and Telephone Consultative Committee (CCITT). ATM can also be used in local private applications.
The V23826-H18-C366 is a single unit comprised of a transmitter, a receiver, and an SC receptacle. This design frees the customer from many alignment and PC board layout concerns. The module is designed for low cost WAN applications. The V23826-H18-C366 can be used as the network end device interface in workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, and intelligent hubs, as well as wide area ATM switches.
The V23826-H18-C366 operates at 622.080 Mbit/s from a single power supply (+3.3 V). The differential data inputs and outputs are PECL compatible.
V23826-H18-C366 Data Sheet
